ULTIMATE HISC40 Hose Nozzle Instructions
- June 9, 2024
- UltimatE
Table of Contents
HISC40 Hose Nozzle
Instructions
HISC40 Hose Nozzle
IMPORTANT:
DURING THE WINTER SEASON OR FREEZING COLD TEMPERATURES, REMOVE THE NOZZLE FROM
THE HOSE AS RESIDUAL/STANDING WATER CAN FREEZE /EXPAND AND CAN DAMAGE THE
NOZZLE.
HAPPY WATERING! For maximum water flow, we suggest you use a 5/8 inch or
larger hose! Using a smaller hose may diminish the performance of your nozzle.
If you have any questions regarding the operation of your ULTIMATE® HOSE
NOZZLE please contact: Customer Service Department
INSTRUCTIONS FOR PROPER USE AND CARE OF THE ULTIMATE® HOSE NOZZLE
Should your nozzle operate improperly, it may be due to dirt or debris inside
the nozzle. If this happens, it could cause the spray pattern to be irregular.
Your nozzle is designed for easy cleaning:
Simply insert a 5/32″ Allen Wrench into the “Hexagonal” screw head of the
nozzle. After removing the screw, unscrew the barrel from the hose stem and,
if dirty, wash/clean out the debris. Put the nozzle back together in the same
fashion as you took apart making sure the “Hexagonal” screw is secured tightly
in place. Keeping the nozzle clean will ensure correct operation.
Note: If the lubrication on the black stem and O-rings is removed, re-
lubricate with clear silicone grease; available at any hardware store. If your
nozzle begins to leak from center of barrel, please contact our Toll Free
number: 866-833-4472 for a new O-ring
kit.
H.I.S.C. Inc.
1009 Calle Recodo
San Clemente, CA 92673
Toll Free: 866-833-4472
customerservice@shopdepalma.com
sdvfgfggfgfgfgfgfgfgfgfgfgfgfgf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>