Akozon WR007M Winch Wireless Remote Control User Manual
- June 9, 2024
- Akozon
Table of Contents
Akozon WR007M Winch Wireless Remote Control
Main technical specifications
- Product Name: WINCH WIRELESS REMOTE CONTROL
- Voltage: DC3V
- Working Current: ≤18mA
- Quiescent Current: ≤5uA
- Transmission Frequency: 315MHZ
- Type of Modulation: ASK
How to use
- Learning Explanation:
- Press ON/OFF button of remote and hold 3 seconds to start. (Need keep pressing the button for 3 seconds.) The lamp will light. Another 3 seconds press for shut off or it’ll be off together with the lamp after 2 mins if there is no operation at all.
- Clear and Study Status:
- Press both remote “IN & OUT” buttons for 20 seconds when the receiver and remote are both opened to clear the learning status. The lamp will turn to light from flashing.
- Then press both the “IN & OUT” buttons 3 seconds for learning. When the light turns to light from off, it means it’s learned successfully. Now you can operate the “IN&OUT” button to control the motor.
- Clear and Learn function only can be operated in 2 mins time. If your operation process exceeds 2 mins, the remote will turn to auto‐off status. Then you need to progress the above process again.
- Interference: During operation, it may be disturbed according to the actual environment, so the remote distance may also change.
Notes
- Do not let remote control suffer violent vibration. Do not expose remote control to liquid or other moist environment.
- Keep it away from direct sunshine. Remote control will twist under heat.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
_ Caution: _Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with minimum distance 0mm between the radiator & your body.
ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
RF Exposure Statement
The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with a minimum distance 0mm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>