hager KEB735N1 Fire Protection Block Instruction Manual
- October 30, 2023
- hager
Table of Contents
Hager KEB735N1 Fire Protection Block
Product Information
- Product Name: Unknown
- Model Numbers: KEB735N1, KEB735M1
- Certifications: IEC/EN 61439-1, IEC/EN 61439-6
- Main Circuit: 1 Ue Rated operational voltage, 2 fn Rated frequency range, 3 Icc Conditional rated short-circuit current, 4 ISize Size, tap-off box, 5 Inc Rated current (for MCCB: Value of the overload trigger), 6 Imax max. rated current of the fuse-link
Product Usage Instructions
- The installation of this product must only be carried out by a qualified electrician in accordance with the relevant country’s installation standards, directives, conditions, and safety regulations.
- Do not exceed any of the maximum allowable values.
- Follow the installation instructions for the installed devices. The tap-off box cannot be used to power appliances.
- This instruction manual is part of the product and must remain with the customer.
- The assembly (DBO) designated markings must be completed as specified in IEC/EN 61539 – 1 clause 6.1.
- Ensure that L1, L2, L3, N connections are okay before use.
Safety Information
-
DANGER! The electric shock when live parts are touched! An electric shock can lead to death!
-
Electrical devices may only be installed and assembled by a qualified electrician in accordance with the relevant installation standards, guidelines, regulations, directives, and safety and accident prevention regulations of the country.
-
Always comply with the warning information on the device!
-
Do not exceed any approved maximum values.
-
Observe the mounting instructions of the installed devices.
-
The tap-off box may not be used to supply energy to the busbar system (IEC 61439-6).
-
Failure to comply with these installation instructions may result in damage to the device, fire, or other hazards.
-
These instructions are an integral component of the product and must be retained by the end user.
DANGER!
Electric shock when live parts are touched! An electric shock can lead to
death!
- Isolate all connection cables before working on the device and cover any live parts in the area!
- Disconnect all the parts of the busbar system which have an electrical connection to the empty tap-off box from it.
Details on the type label Main circuit:
- Ue Rated operational voltage
- fn Rated frequency range
- Icc Conditional rated short-circuit current
- ISize Size, tap-off box
- Inc Rated current (for MCCB: Value of the overload trigger)
- Imax Max. rated current of the fuse-link
TOOLS
WHAT
INBOX
INSTALLATION
Shorten the phase barrier fields (not in the scope of delivery) and use them for the incoming side
INFO
PARTS
- MCCB was used during the test according to 61439 – 6 Para. 10.10.2. For conversion to other MCCBs of the same series, see unibar M technical handbook.
- Ambient temperature during test according to 61439 – 6 Para. 10.10.2.
- Intended for MCCB H3+ P400
CONTACT
- T +49 6842 945 0
- F +49 6842 945 4625
- info@hager.com.
- hager.com.
- 03.2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>