REXING S7 Adjustable Wireless Charger with Bedside Lamp User Manual

: June 9, 2024
: Rexing

Table of Contents

REXING S7 Adjustable Wireless Charger with Bedside Lamp
Overview
Package Contents
Product Overview
Features
Time Setting
Alarm Setting
Specifications
Warranty & Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

REXING S7 Adjustable Wireless Charger with Bedside Lamp

REXING-S7-Adjustable-Wireless-Charger-with-Bedside-Lamp-
PRODUCT

The information in this manual is subject to change without notice. www.rexingusa.com

Overview

Thank you for choosing REXING!
We hope you love your new products as much as we do. If you need any assistance, or have any suggestions to help us improve, please contact us.

care@rexingusa.com
877-740-8004
9 am – 6 pm EST (Monday to Friday)

Our Support Team will respond to you as soon as possible. Always a surprise in Rexing.

Check us out here.

REXING-S7-Adjustable-Wireless-Charger-with-Bedside-Lamp-
FIG-1

Package Contents

REXING-S7-Adjustable-Wireless-Charger-with-Bedside-Lamp-
FIG-2

Adjustable Wireless Charger w/ Bedside Lamp
Type-C Cable
User Manual
Safety Guide
Warranty Card

Caution

Do not use this charger under high-temperature conditions above 140 degree Fahrenheit (60 degrees Celsius).
Please use the product in a safe and stable environment.

Product Overview

REXING-S7-Adjustable-Wireless-Charger-with-Bedside-Lamp-
FIG-3

Brightness Adjustments
The brightness of the digital tube display changes with the brightness of the ambient light; when the ambient light becomes brighter, the display screen becomes brighter, and when the ambient light becomes darker, the display screen also becomes darker.

Connect with the power supply. Touch the control area to turn on the light; and touch the area again to turn it off.

Features

Auto-recognition & aligning will take place after the device is on; the night light and clock display panel will be on constantly after set up.
When a phone is placed on the charger, the panel will automatically scan the phone to find the best location for a fast, wireless charge. The display will show a wireless charging icon.
After the panel recognizes the mobile phone, if it finds that it does not support wireless charging, the wireless charging icon will flash quickly for 5 seconds, and then the indicator will go out.
If the phone is placed on the panel and the panel fails to recognize the phone automatically, you can click LEFT or RIGHT button to reactivate the panelâ€™s
auto-recognition function (This function is not available in the clock and the alarm setting mode).
Fully charge indication: The display’s charging icon on the bottom right is on.

Time Setting

(hour/minute adjusment)

Press the M button to enter the time setting mode, and the tens digit of the hours will start to flash.
Use the LEFT and RIGHT buttons to adjust the time.
If no button is in operation for more than 10 seconds when any number is flashing,
the setting edit will be canceled, and the current setting data will be invalid. If you
re-press any button, the Time Setting will restart.
When the hour adjustment is complete, press the M button again to enter the setting of the next digit; when the hours and minutes have been set, press the M button again to confirm. You’ll hear a long beep when the time setting is successful.

Alarm Setting

Non-repeat Alarm:
(hour/minute adjusment)

Hold the M button to enter the Non-repeat alarm setting mode, the tens digit of the hour and the alarm icon will start to flash.
Use the LEFT and RIGHT buttons to adjust the time.
If no button is in operation for more than 10 seconds when any number is flashing, the setting edit will be canceled, and the current setting data will be invalid. If you re-press any button, the Time Setting will restart.
When the hour adjustment is complete, press the M button again to enter the setting of the next digit; when the hours and minutes have been set, press the M button again to confirm which will follow by a long beep sound. When the alarm clock symbol lights up, it means that the single alarm setting is successful.
When the time of the non-repeat alarm is triggered, the alarm icon is always on. The buzzer will also intermittently beep, light up, and flash simultaneously. After 1 minute, the buzzer will stop automatically, and the light and the alarm clock icon will go out. If any button is pressed during the alarm period, it will end immediately.

Repeat Alarm

Hold the RIGHT button to enter the repeat alarm setting mode, the tens of the hour starts to flash, and the alarm symbol flashes.
Use the RIGHT and LEFT buttons to adjust the time.
If no button is in operation for more than 10 seconds when any number is flashing, the setting edit will be canceled, and the current setting data will be invalid. If you re-press any button, the Time Setting will restart.
When the hour adjustment is complete, press the M button again to enter the setting of the next digit; when the hours and minutes have been set, press the M button again to confirm. A long beep indicates that the repeat alarm clock is successfully set.
When the time of the repeat alarm is triggered, the alarm icon is always on. The buzzer will also intermittently beep, light up, and flash simultaneously. After 1 minute, the buzzer will stop automatically, and the light will go out. If any button is pressed during the alarm period, it will end immediately.
When the alarm is over, the charger will retain the data for the repeat alarm in the memory, which means the alarm will still be there, and when the next alarm time comes, the alarm will ring again.

Clear Alarm

Hold the RIGHT button, a long beep indicate that the alarm data has been cleared from the memory (including non-repeat alarm and repeat alarm).

Clock Memory
After the clock is set, the original setting of the clock will not change even if the power is off.

Snooze
When the alarm sounds, touch control area once to enter the snooze mode; it will ring again after 10 minutes, and repeat this cycle; If there is no action within 1 minute of continuous ringing, the alarm will stop.

Specifications

Name Adjustable Wireless Charger w/ Bedside Lamp
Input 5V-2A 9V-2A
Output Power 15W (compatible with 10W, 7.5W, 5W)
Working Distance 3-6mm
Compatibility All Qi-enabled mobile phone

Warranty & Support

Warranty
The Rexing Adjustable Wireless Charger w/ Bedside Lamp comes with a full 12-month warranty. If you register your product on our official site https://www.rexingusa.com/support/registration, you can extend the warranty to 18 months.

Support
If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at 877-740-8004. Queries are typically answered within 12-24 hours.

Your opinion matters
Rexing is firmly committed to always improving our products, services, and user experience. If you have any thoughts on how we can do even better, we welcome your constructive feedback and suggestions. Connect with us today at care@rexingusa.com

Thank you for choosing Rexing!

FCC ID: 2AXTH-M5

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.