DRAPER 75170 Torque Screwdriver Kit Instructions
- June 9, 2024
- DRAPER
Table of Contents
DRAPER 75170 Torque Screwdriver Kit
INSTRUCTIONS
Designed for applying the correct torque for engine casing screws, camshaft position sensors, ignition coils etc.
- Locking collar prevents accidental change of torque setting.
- +/- 6% clockwise accuracy, complies with ISO:6789.
- Range 1-5Nm.
- Only for clockwise torque tightening, cannot be used on reverse thread fixings.
Examples of torque settings
-
Pull out the locking collar for setting torque, turn Left to increase torque, turn right to reduce torque.
-
Torque setting is based on main scale plus locking collar scale. Adjust the locking collar scale, which is in increments of 0.02 N-m.
-
After adjusting torque setting, push down locking collar into “Lock” position.
EXAMPLE- 2.3 N-m
- View the main scale with the angle perpendicular to the handgrip.
- In order to extend the product service life, the torque setting should be adjusted to the minimum value if the product is not to be operated for a long period.
Customer Service
Helpline: +44 (0) 23 8049 4344
Sales Desk: +44 (0) 23 8049 4333
General Enquiries: +44 (0) 23 8026 6355
internet: drapertools.com
email: sales@drapertools.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>