DRAPER 28106 Hardware Tool Kit Instruction Manual
- June 9, 2024
- DRAPER
Table of Contents
DRAPER 28106 Hardware Tool Kit
Read this manual in full before attempting to use this product and retain it for future use. Always use the latest version of the manual.
Voltage Tester
Scope
This product is designed to test the voltage at a given point in a circuit and
to locate breakages in cables. Any other application is considered misuse.
Draper Tools accepts no responsibility for improper use of this product.
Voltage testing range: 12–250V AC/DC
Safety Information
WARNING: Working with electricity is dangerous. Always consult a suitably
qualified person if you are not certain of what you are doing. NEVER touch the
metal blade during use.
Important: This product is NOT a screwdriver. Using it as such is
dangerous and may cause damage to the user or tool.
Operating Instructions
Voltage Test
Place the blade into or onto a “live” aperture or contact and press and hold
the “Direct Test” button. An approximation of the voltage is indicated on the
LCD display.
Induction Test
To find a broken cable, ensure that the supply is live, press and hold the
“Induction Break-Point Test” button and track the blade from the plug towards
the appliance. A lightning symbol is shown on the LCD display until a break is
detected. Repeat the test to confirm the location.
Disposal
Dispose of this tool in accordance with local regulations.
- DO NOT dispose of this tool with domestic waste.
- DO NOT dispose of this tool in unsorted municipal waste.
- DO NOT incinerate.
- DO NOT abandon in the environment.
Snap-Off Knife
Health and Safety Information
WARNING! The blade in this product is very sharp. Do not extend the blade
more than two segments. Fully retract the blade when it is not in use.
Important: ALWAYS wear safety goggles during use. Excessive pressure can
cause segments to break off unintentionally. Remove blade segments when they
become blunted or worn.
Operation Instructions
Use the tab to extend and retract the blade as necessary. To remove blunt
segments, squeeze and slide the black removal tool away from the end of the
knife body. Extend the blade so that the blunt segment is clear of the guard
and insert the tip into the removal tool. Use the removal tool to snap the
segment off the blade. Alternatively, use pliers or another suitable gripping
tool to snap off the blade.
Important: ALWAYS snap the blade away from you.
Explanation of symbols
- Metric sizing
- Chrome vanadium steel
- 1/4” hex drive
- Do not incinerate or throw onto fire
- Do not abandon in the environment
- WEEE: WEquipmentaste Electrical & Electronic
- Do not dispose of this product with domestic waste
- UK Conformity Assessed
- European Conformity
General Enquiries:
+Helpline: +44 (0) 23 8049 4344 Sales Desk: +44 (0) 23 8049 4333 te:
drapertools.com
Email: s44 (0) 23 8026 6355
Wales@drapertools.com
Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire,
SO53 1YF, UK
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>