POWERTECH HS-9064 Car Cup Charger with 15W Wireless Charger User Manual
- October 29, 2023
- POWERTECH
Table of Contents
Car Cup Charger with
15W Wireless Charger
User Manual
HS-9064
Box Contents:
| 1 x Wireless Charger
---|---
| 1 x Cup Mount
| 1 x USB-C Power Cable
Product Diagram:
Installation:
- Unscrew the adjustable mounting ring knob from the phone cradle. Place it over the end of the cup mount.
- Attach the phone cradle to the cup mount and tighten the adjustable mounting ring knob so the cradle and cup mount are secured tightly.
- Place the cup mount in the cup holder of your car. Use the adjustable locking knob at the base of the cup mount to expand the size of the cup mount. Adjust until it fits securely in your cup holder.
Power:
- Insert the USB power cable in a 5VDC/9VDC USB car charger (not included).
- Insert the USB-C plug in to the USB power socket of the phone cradle.
- The LED status indicator will turn green once it has been powered on.
Note: It is suggested to use a Qualcomm® Quick Charge™ 3.0 USB car charger for fast charging. Please check to see if your device supports quick charge otherwise it will charge at 5W.
Operation:
Charging:
- Press the lock/release button to open the phone clamps.
- Slide down the adjustable holder located at the bottom of the cradle and slide your smart phone into the cradle.
- The LED status indicator will turn blue once charging has started.
Note: You may need to change the position of the adjustable holder at the bottom of the cradle. The wireless charging pads are in a different location depending on the type of smartphone.
Troubleshooting:
| Problem: | Solution: |
|---|---|
| Will not charge device | Ensure your smartphone supports Qi wireless charging |
Ensure the mobile device is placed on the charging pad correctly and adjust
the adjustable foot holder accordingly Restart your mobile device and wireless
charger
Will not charge device| Take off your phone case as it may be interfering with
the wireless charger
Will not power on| Ensure the USB cable is connected properly to a suitable
USB car charger
Safety:
- Do not place any metal objects, magnets, magnetic stripe cards or metal phone cases between the mobile device and the charger as it may not work properly.
- Keep the wireless charger at least 20cm away from any implantable medical devices such as a pacemakers or cochlear, etc. to avoid interference with the medical device.
- Do not open the case of the wireless charger to avoid damage and injury.
- Keep the wireless charger away from high temperatures as it may cause damage to the speaker and battery.
- Do not expose the wireless charger to water, moisture or liquids to prevent the unit from damage.
Specifications:
Input: 5VDC @ 2A, 9VDC @ 1.7A
Voltage Output: 5VDC, 9VDC
Current Output: 5V @ 1A (5W) 9V @ 0.8A (7.5W) 9V @ 1.1A (10W) 9V @ 1.66A
15W)
Output Power: 5W/7.5W/10W/15W
Charging Efficiency: 73% (Max)
Charging Distance: ≤7mm
Battery: 3.7V Li-ion, 60mA
Battery Standby Time: Up to 30 Days
Dimensions: 287(H) x 90(Dia)mm
Distributed by:
Electus Distribution Pty. Ltd.
46 Eastern Creek Drive, Eastern Creek
NSW 2766 Australia
Ph: 1300 738 555
Int’l: +61 2 8832 3200
Fax: 1300 738 500
www.electusdistribution.com.au
Documents / Resources
|
POWERTECH HS-9064 Car Cup Charger with 15W Wireless
Charger
[pdf] User Manual
HS-9064 Car Cup Charger with 15W Wireless Charger, HS-9064, Car Cup Charger
with 15W Wireless Charger, Car Cup Charger, Cup Charger, Charger
---|---