NITECORE MH25 V2 Dual Fuel Range Flashlight User Manual
- June 4, 2024
- Nitecore
Table of Contents
NITECORE MH25 V2 Dual Fuel Range Flashlight User Manual
Warranty Service
All NITECORE® products are warranted for quality. Any DOA /defective product
can be exchanged for a replacement through a local
distributor/dealer within 15 days of purchase. After that, all defective /
malfunctioning NITECORE® products can be repaired free of charge within 60
months from the date of purchase. Beyond 60 months, a limited warranty
applies, covering the cost of labor and maintenance, but not the cost of
accessories or replacement parts.
The warranty will be nullified if
- the product(s) is/are broken down, reconstructed and/or modified by unauthorized parties;
- the product(s) is/are damaged due to improper use; (e.g. reversed polarity installation)
- the product(s) is/are damaged due to battery leakage.
For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com
※ All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occur between this manual and information specified on www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.
Features
- Utilizes a high performance LED with a max output of 1,300 lumens
- Max peak beam intensity of 57,000cd and max throw of 475 meters
- An optical system combined with crystal coating and “Precision Digital Optics Technology” (PDOT)
- Powered by a 21700 high capacity Li-ion battery while compatible with 18650 and CR123 batteries, to provide a runtime up to 1,500 hours
- Tactical Mode and Daily Mode available
- The tactical tail switch and the metal side switch control 4 brightness levels and 3 special modes
- STROBE Mode uses randomly changing frequencies for stronger dizzying effects
- A power indicator beneath the side switch indicates the remaining battery power
- The power indicator can display the battery voltage (±0.1V)
- Intelligent Li-ion battery charging circuit with a USB-C charging port
- NITECORE 21700 Li-ion battery included (NL2150 5,000mAh)
- Highly efficient constant current circuit provides a stable output
- Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6)
- Electronic reverse polarity protection
- Optical lenses with double-sided scratch resistant coating
- Constructed from aero grade aluminum alloy
- HA III military grade hard-anodized finish
- Waterproof and dustproof rating in accordance with IP68 (2 meters submersible)
- Impact resistant to 2 meters
- Tail stand capability
Specifications
Length: 157.2mm (6.19″)
Head Diameter: 40mm (1.57”)
Tube Diameter: 25.4mm (1”)
Tail Diameter: 27.2mm (1.07”)
Weight: 137g (4.83oz)
Accessories
NITECORE 21700 Rechargeable
Li-ion Battery (NL2150 5,000mAh),
USB-C Charging Cable, Clip,
Lanyard, Spare O-ring,
18650/CR123 Battery Magazine,
Holster
Battery Options
Note : DO NOT attempt to use the MH25 V2 to charge CR123/RCR123 batteries.
Technical Data
Note : The stated data is measured in accordance with the international flashlight testing standards ANSI/PLATO FL 1-2019, using 1 x 21700 Li-ion battery (5,000mAh) under laboratory conditions. The data may vary in real world use due to different battery usage or environmental conditions.
Battery Installation
Charging Function
Charging Function
The MH25 V2 is equipped with an intelligent charging system. As illustrated, after inserting the battery and tightening the tail cap, use the USB cable to connect an external power supply (e.g. a USB adapter or other USB charging devices) to the charging port to begin the charging process.
- During the charging process, the power indicator will flash slowly to inform the user.
- When the battery is fully charged, the MH25 V2 will cease the charging process and the power indicator will become steadily turned on to inform the user.
- When the light is on, connecting to a power source will automatically turn the light off. The light will return to its previous status when it is disconnected from the power source.
- The charging time for a 21700 Li-ion battery (5,000mAh) is approx. 3 hours 45 minutes. (Charged via the 5V/2A adapter)
Operating Instructions
Battery Installation
Insert the battery(s) as illustrated and screw to tighten the tail cap.
Warnings:
- Ensure the battery(s) is/are inserted with the positive end towards the head. The product will not work if the battery(s) is/are incorrectly inserted.
- Please use the battery magazine when using 1 x 18650 / 2 x CR123 batteries to avoid battery rattling and to ensure a stable contact.
- CAUTION! Possible dangerous radiation! Don’t look into the light! Maybe dangerous for your eyes.
- When the power level is low, please stop using the product and replace or recharge the battery to prevent damage to the battery.
- When the product is kept in a backpack or left unused for prolonged time, please remove all batteries to prevent accidental activation or battery leakage.
Tactical Momentary Illumination
Half press and hold the Tail Switch to turn on the light momentarily. Release to turn it off.
On / Off
On: When the light is off, press the Tail Switch until a click sound is heard
to turn it on.
Off: When the light is on, press the Tail Switch until a click sound is heard
to turn it off.
User Mode Selection
The MH25 V2 provides 2 user modes for different users and situations.
- Daily Mode (Default Setting): In this user mode, there are 4 brightness levels and 3 special modes (STROBE, BEACON and SOS) available. The MH25 V2 will memorize and re-access any of the 4 brightness levels or STROBE Mode (BEACON and SOS excluded) when reactivated, unless it has been switched to the other user mode.
- Tactical Mode: In this user mode, there are only 4 brightness levels and STROBE Mode available. The MH25 V2 will only memorize and reaccess HIGH Level or STROBE Mode when reactivated, unless it has been switched to the other user mode.
To select a desired user mode:
- When the light is off, click the Tail Switch while holding the Mode Button.
- Keep holding the Mode Button for approx. 3 seconds, and the main LED of the flashlight will indicate a user mode selected by flashing once for Daily Mode and flashing twice for Tactical Mode.
- Release the Mode Button, and the flashlight will be automatically turned on after this process.
Brightness Levels
- Daily Mode: When the light is on, short press the Mode Button to cycle through the following brightness levels: ULTRALOW – LOW – MID – HIGH.
- Tactical Mode: When the light is on, short press the Mode Button to cycle through the following brightness levels: HIGH – MID – LOW – ULTRALOW.
Special Modes (STROBE / BEACON / SOS)
- Daily Mode: When the light is on, keep holding the Mode Button to cycle through the following special modes: STROBE – BEACON – SOS. Release to select the desired special mode.
- Tactical Mode: When the light is on, long press the Mode Button to access the STROBE Mode.
- When one of the special modes is on, short/long press the Mode Button to exit special modes and return to the previous brightness level; or click the Tail Switch to turn off the light.
Power Indication
- When the light is off, click the Tail Switch while holding the Mode Button and then quickly release both buttons to access Power Indication. The power indicator beneath the Mode Button will flash to show the battery voltage (±0.1V). The flashlight will be automatically turned on after this process.
For example, when the battery voltage is at 4.2V, the power indicator will flash 4 times followed by a 1.5-second pause and 2 more flashes. Different voltages represent the corresponding remaining battery power levels:
Note : When using two CR123/RCR123 in series, the indicator will show the average voltage between the two batteries.
- When the light is on and the power level is close to 50%, the power indicator will flash every 2 seconds to inform the user. When the light is on and the power is close to depleted, the power indicator will flash quickly and continuously to inform the user. The batteries should be replaced or recharged when the output appears to be dim or the flashlight becomes unresponsive due to low power.
ATR (Advanced Temperature Regulation)
The integrated ATR technology regulates the output of the MH25 V2 according to the working condition and ambient environment to maintain the optimal performance.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.
SYSMAX Innovations Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address： Rm 2601-06, Central Tower, No.5 Xiancun Road, Tianhe District,
Guangzhou, 510623, Guangdong, China
Made in China
Please find us on facebook : NITECORE Flashlight Thanks for purchasing NITECORE!
Documents / Resources
|
NITECORE MH25 V2 Dual Fuel Range
Flashlight
[pdf] User Manual
MH25 V2, Dual Fuel Range Flashlight, MH25 V2 Dual Fuel Range Flashlight, Range
Flashlight, Flashlight
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>