immax 07903L Reflectores Smart Solar Spotlight Owner’s Manual
- June 9, 2024
- immax
Table of Contents
IMMAX NEO LITE REFLECTORES SMART SOLAR
SPOTLIGHT, RGB, IP65, BLUETOOTH, TUYA
MODEL: 07903L
TECHNICAL PARAMETERS
Communication protocol: Bluetooth
Solar panel: polycrystalline silicon 5.5V/3W
Battery: 18650, Lithium battery 3.7V/2200mAh
Type and number of LEDs: 4pcs, Epistar LED
Charging time: 4-5 hours
Working time:10-12 hours
Degree of protection: IP65
Function: light control by app
Chromaticity: RGB
Material: aluminum + ABS + PC
Cable length: 3m
Before installing the solar luminaire, read the instructions carefully. And
follow the instructions given.
Allow the solar luminaire to charge sufficiently in sunlight for at least 4-6
hours before using it for the first time.
The luminaire will charge during the day and automatically light up after
dark.
If the solar lantern is not working properly or the working time is short,
place it directly in the sun and let it charge for 2 days in direct sunlight.
Do not switch on the solar lamp during this process. The battery should be
fully charged.
NOTICE
- Install the product preferably where there are no trees, gutters or other obstructions that could block sunlight. If the solar panel does not have enough sunlight, it will affect the shining time.
- Do not install the product under other light fixtures. Lighting generated by other fixtures may cause the product to malfunction or flicker.
- The product has a light sensor, use it where there is no light.
- Rainy, foggy, or cloudy weather will affect lamp charging, working time will be shortened.
- The performance of the solar reflector depends on the environment, latitude, seasons, etc.
- Install the product preferably in places where there are no trees, gutters, and other obstacles that could block sunlight. If the solar panel does not have enough sunlight, it will affect the shining time
- The solar spotlight contains batteries, please recycle the batteries in accordance with the relevant laws and regulations of the user‘s country or region.
- Do not immerse the solar panel in water
MAINTENANCE
In order to allow the PV panel to receive maximum solar radiation, keep the
solar panel clean by wiping it with a soft, damp cloth. Avoid abrasive and
cleaning agents!
PRODUCT MANUAL
- WW model: Press the switch first, turn on to 100% brightness, press the switch a second time, half brightness.
- Press the switch first, RGB changes gradually, press second time, fix green light, press third time, fix red light, press fourth time, fix blue light.
- Smart model.
The package includes
1 x solar panel
4 x M5 internal hexagon screw
4 x reflector
3 x screw
1 x plastic rod
4 x M5 screw washer
4 x aluminium rod
3 x plastic expandable tube
1 x instruction manual for the product
1 x 3mm internal hex key
1 x 4mm internal hex key
PRODUCT ASSEMBLY STEP
- Use round head screws to connect the bracket to the solar panel.
- Connect the ground pin to the solar panel
- Preview of the main solar panel assembly
- Use the pan head screws to connect the ground pin to the bracket.
- Tighten the screws using a hex wrench and the assembly is complete.
INSTALLATION MODE
Into the ground:
1. After connecting the ground pin, just push it into the grass.
1. After connecting the ground stake, just insert into the grass.
To the wall:
2. Follow the distance of the holes of the base of the bracket, the pole on
the wall. After inserting into the plastic plug, fix the solar panel on the
wall with a wooden screw.
2. Stick the rod on the wall and use the wooden screw to fix the solar panel
on the wall
Manufacturer and importer: WPB CZ,
s.r.o. Pohoří 703, 742 85 Vřesina, Czech Republic
www.immax.cz
www.immax.eu
Documents / Resources
|
immax 07903L Reflectores Smart Solar
Spotlight
[pdf] Owner's Manual
07903L Reflectores Smart Solar Spotlight, 07903L, Reflectores Smart Solar
Spotlight, Smart Solar Spotlight, Solar Spotlight, Spotlight
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>