ARIA004 No-See Receptacle Mount Installation Guide
- June 3, 2024
- Aria
Table of Contents
ARIA004 No-See Receptacle Mount
Instructions
Materials Needed
- Pre-cut piece of surface material for tray insert
- Size will vary depending on model
- Bonding material (will vary dependi ng on surface)
- 4x self tapping screws
Materials Included
- No-See Receptacle
- Components: Tray, Body, Base
- Utility box (with screws)
- Disengage Body from Base by pushing firmly towards the hinged walls’ innermost corner with the door ajar.
- Dry fit Base into wall. Fasten base to stud using provided pilot holes as necessary
- Apply silicone in Tray. Set pre-cut Tray insert into place. Allow time to cure.
- Using the screws in the utility box, fasten the utility box to the rear of body component.
- Re-engage body by aligning latches and pushing firmly towards the inner corners opposite of the hinged door.
Maintenance
To hardwire electrical, have an electrician repeat steps #1 & #5 to access utility box.
Additional Support
support@ariavent.com
www.ariavent.com
@ariavent
Patent information
www.ariavent.com/pages/patents
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>