WL4 RPRO-QR-EM-MF QR Code Plus RFID Access Control Reader User Manual
- June 9, 2024
- WL4
Table of Contents
QR code reader
user’s manual
Overview
WL4 RPRO-QR-EM/MF QR code + RFID access control reader is a new generation of multifunctional reader. The appearance of this product adopts the standard 86 box industry standard. It has fast scanning speed, high recognition rate, strong compatibility, and can be connected to any Wiegand input. The controller is suitable for various application scenarios. At present, it is widely used in business office building visitor entry management, scenic tourist staff management, community visitor entry and exit management, administrative hall access control management, supporting gates, access control, visitor machines, smart homes, etc.; it is a perfect upgrade for traditional credit card systems in various industries.
Technical parameter
| project | parameter | project | parameter |
|---|---|---|---|
| Card reader type | EM card or Mifare card | Barcode type | QR, one/two- |
dimensional code
communication method| Wiegand 26/34/RS232/RS485/TTL| Decoding mode| Image
decoding
Reading direction (bar code)| Angle 45° with the lens as the center point|
Scan code
characteristics| Automatic induction, buzzer prompt
Operating Voltage| 8-12V| Working current| 800m A
Card reading distance (card)| 3-6CM| Reading speed| < 200ms
Reading distance (QR code)| 0-20cm| Material quality| Zinc alloy frame +
acrylic panel
Working humidity| 10%-90%| Operating
temperature| -20 °C-70 °C
operating system| WindowsXP/7/8/10), Linux| Size| 86m m •86m m •l8m m
Indicator light| Blue work light, green feedback light| Weight| 150G
Card reader prompt
The blue light is always on after wiring, the green light flashes and a buzzer
prompts after the card reading or scanning is successful
Wiring definition
| Wiegand 26/34 | RS485 | RS232 |
|---|---|---|
| Red line: 12v | Red line: 12v | Red line: 12v |
| Black wire: GND | Black wire: GND | Black wire: GND |
| Green line: D0 | Brown wire: 485A | Blue line: RX |
| White line: D1 | Orange: 485B | Yellow line: TX |
Setting code description
Card reading parameter settings
-
Set the output format
-
Output format description
Take ID card number 00 11 22 AA BB as an example:
- 10-digit decimal (4 bytes after id conversion): 0287484603
- 10-digit decimal reverse output (4 bytes after id conversion): 3148489233
- 8-digit hexadecimal: 1122AABB
- 8-digit hexadecimal reverse output: BBAA2211
- 8-digit decimal (3 bytes after id conversion): 02271931
- 00+8-digit decimal (3 bytes after id conversion): 0002271931
- 8-digit decimal (4 bytes after id conversion): 87484603
- 5-digit decimal (the last 5 digits on the card): 43707
- 18-digit decimal (all numbers on the card): 028748460303443707
- 13-digit decimal (id5 byte to decimal): 0000287484603
- 10-digit hexadecimal: 001122AABB
- 2H4D+2H4D: 0438643707
- 8-digit decimal (the last 8 digits on the card): 03443707
-
Other setting instructions
[Add before data; sign]: Add before data in output format;
[Add after data? Number]: Add? After the data in the output format
[Add a comma in the middle]: Format 9), 12), 13) add a comma in the middle -
Output format settings
Check the corresponding setting and click the setting button. -
Read current settings
Click the read button to get the current settings. -
Data Format
USB part output 8H10DUSB card number
Serial port -485 output card number For example, 10-digit card number
1234567890, the card reader will output 31 32 33 34 35 36 37 38 39 30 0D 0A
The first 10 bytes are the physical card number 0D Enter 0A Line feed
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>