nVent CAT48HPAFAB6 CADDY Cat HP J-Hook Instructions
- June 9, 2024
- nVent
Table of Contents
CAT48HPAFAB6 CADDY Cat HP J-Hook
Instructions
CAT48HPAFAB6 CADDY Cat HP J-Hook
NVENT CADDY CAT HP J-HOOK WITH PIN DRIVEN ANGLE BRACKET, 3″ DIA, 3/8″ HOLE
CATALOG NUMBER
CAT48HPAFAB6
CERTIFICATIONS
FEATURES
Longer leg angle bracket for tool clearance
Designed to fit a variety of pin drivers
Provides optimal support for high-performance data cable, up to and including
Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic
Provides superior fill capacity and load rating over most other non-continuous
cable support alternatives
Rounded edges on J-Hooks provide proper bend radius support for high
performance data cables
Cost effective alternative to expensive cable tray
Complies with EN 50174-2
Meets ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569
PRODUCT ATTRIBUTES
Material: Steel
Finish: Pregalvanized
Diameter: 3″
Area: 9.26 in²
Cable Capacity, Cat 5e: 200
Cable Capacity, Cat 6: 150
Cable Capacity, Cat 6A: 80
Hole Size: 3/8″
Static Load: 60 lb
ADDITIONAL PRODUCT DETAILS
Non-continuous supports may not exceed spacing of 5′ (1.5 m) per TIA 569-C.9.7 and EN 50174-2. Cable capacity is calculated based on a 70% fill rate.
DIAGRAMS
WARNING
invent products shall be installed and used only as indicated in vent’s
product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and from your invent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow vent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support| Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793| Europe
Germany:
800 1890272
Other Countries:
+31 13 5835404| APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500
---|---|---|---
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER
© 2022 invent.
All invent marks and logos are owned or licensed by invent
Services GmbH or its affiliates.
All other trademarks are the property of
their respective owners.
invent reserves the right to change
specifications without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>