Keychron Q0 Plus Customizable Keyboard User Manual

June 9, 2024
Keychron

Keychron Q0 Plus Customizable Keyboard

Fully Assembled Version

Keyboard

  • 1x Fully Assembled Keyboard
    Including

  • 1x Aluminum Case

  • 1x PCB

  • 1x Steel Plate

  • 1x Sound Absorbing Foam

  • 3 Sets x Stabilizers

  • 1 Set x Keycaps (PBT Double-shot)

  • 1 Set x Switches
    Cable

  • 1x Type-C to Type-C Cable

  • 1x Type-A to Type-C Adapter
    Tools

  • 1x Switch Puller

  • 1x Keycap Puller

  • 1x Screwdriver

  • 1x Hex Key

Barebone Version

Keyboard Kit

  • 1x Keyboard Kit (Without Keycaps & Switches)
    Including

  • 1x Aluminum Case

  • 1x PCB

  • 1x Steel Plate

  • 1x Sound Absorbing Foam

  • 3 Sets x Stabilizers
    Cable

  • 1x Type-C to Type-C Cable

  • 1x Type-A to Type-C Adapter
    Tools

  • 1x Switch Puller

  • 1x Keycap Puller

  • 1x Screwdriver

  • 1x Hex Key

The VIA Key Remapping Software

Please visit caniusevia.com to download the latest VIA software to remap the keys. If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction.

Warranty The keyboard is highly customizable and easy to be rebuilt. If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.

Watch The Building Tutorial On Our Website

If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.

Factory Reset

Troubleshooting? Don’t know what’s going on with the keyboard?

  1. Try factory reset by pressing O+9 +1 (for 4 seconds)
  2. Download the right firmware for your keyboard from our website. Remove the power cable from the keyboard.
  3. Remove the “0” and “” keycap to find the reset button on the PCB.
  4. Hold the reset key while plugging in the power cable and then release the reset key. The keyboard now will enter DFU mode.
  5. Flash the firmware with the QMK Toolbox.
  6. Factory reset the keyboard again by pressing O +9 +1 (for 4 seconds)
    * Step by step guide can be found on our website

PLUS CUSTOMIZABLE KEYBOARD SPECIFICATIONS

Keychron Q0 Plus Customizable Keyboard \(7\)

Specifications


Layout

| ****

Numpad


Switch type

| ****

Mechanical


Width

| ****

137mm


Length

| ****

118.2 mm



Front height

| 20.1 mm (without keycaps)


30 mm (with keycaps installed)



Back height

| 32.6 mm (without keycaps)


41.5 mm (with keycaps installed)

Keyboard feet height| ****

1.9mm


Angle

| ****

5.26 degree

PLUS MECHANICAL KEYBOARD OVERVIEW

DEFAULT KEY LAYOUT

  • LAYER 0: This layer will be activated when your keyboard is connected.Keychron Q0 Plus Customizable Keyboard \(8\)
  • LAYER 1: This layer will be activated when you press the fn/MO(1) key.Keychron Q0 Plus Customizable Keyboard \(9\)

KEY DESCRIPTION


Key Description


Ser-| Screen Brightness Decrease
Ser+| Screen Brightness Increase


Bright-

| ****

Backlight Decrease


Bright+

| ****

Backlight Increase

Prvs| ****

Previous


Play

| ****

Play/Pause


Next

| ****

Next


Mute

| ****

Mute


Vol-

| Volume Decrease


Vol+

| ****

Volume Increase


RGBToggle

| ****

Turn Backlight on/off


Key Description



RGBMd+

| ****

RGB Mode Next


RGBMd-

| ****

RGB Mode Previous


Hue+

| ****

Hue Increase


Hue-

| Hue Decrease


RGB SPI

| ****

RGB Speed Increase


RGB SPD

| RGB Speed Decrease


MO(l)

| Layer 1 will be activated when holding this key

Third-party input tools are not compatible with the keyboard. Due to compatibility, versions, brands and drivers of Windows/macos, functionalities of third-party input tools may be affected while using the keyboard. Please make sure your operating system and drivers are up to date.

Certain multimedia keys or function keys do not work. Functions of certain multimedia keys may be disabled due to compatibility, versions, brands, and drivers of devices.

  • *Multimedia keys
  • Function keys

Safety Precaution

Keep the product, accessories and packaging parts out of the reach of children to prevent any accidents and choking hazards. Always keep the product dry to avoid corrosion. Do not expose the product to extreme temperatures below -10°C(5°F) or above 50°C(131°F) to preserve the lifesparn of the keyboard.

Keychron, Inc. Dover, DE 19901, United States Find us at: https://www.keychron.com Support@keychron.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals