KOHLER K-8334 Imperator 65-3-4 x 31 Freestanding Bath Instruction Manual
- June 9, 2024
- Kohler
Table of Contents
KOHLER K-8334 Imperator 65-3-4 x 31 Freestanding Bath
Features
- Freestanding design creates a striking focal point in your bathing area
- 17″ (432 mm) depth offers a deep soaking experience
- Integral lumbar support
- Slotted overflow allows for deep soaking
- Center toe-tap drain with KOHLER Lithocast® cover
Material
- KOHLER Lithocast® Gloss cast resin
Installation
- Freestanding
Recommended Products/Accessories
- K-23726 Drain treatment
- K-23732 Tub & shower cleaner
Codes/Standards
- CSA B45.5/IAPMO Z124
Warranty
KOHLER® Plastic Baths and Shower Bases Lifetime Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
DIMENSION
Technical Information
All product dimensions are nominal.
- Installation : Freestanding
- Drain location: Center
- Basin area, bottom: 50-1/8″ x 22-3/8″ (1273 mm x 568 mm)
- Basin area, top : 64-1/2″ x 29-5/8″ (1639 mm x 753 mm)
- Weight: 360 lbs (163.3 kg)
- Minimum floor load: 90.9 lbs/ft² (443.8 kg/m²)
- Water depth: 16-15/16″ (430 mm)
- Water capacity: 94.61 gal (358.1 L)
- Template: Footprint, 1314995, not required, not included
Notes
- Measure your actual product for rough-in details.
- Install this product according to the installation instructions.
- The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
- Allow for 3” (76 mm) diameter of clearance around the drain pipe on finished floor material to prevent drain body interference during installation.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com.
2-22-2023 01:44 – US/CA/MX
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>