KOHLER K-3723 Persuade Curv Two Piece Elongated Toilet With Skirted Trapway Dualflush User Guide
- June 9, 2024
- Kohler
Table of Contents
KOHLER K-3723 Persuade Curv Two Piece Elongated Toilet With Skirted
Trapway Dualflush
Features
- K-6355 Persuade® Curv Comfort Height® two-piece elongated dual-flush toilet with top-mount actuator and skirted tramway
- Two-piece design
- Elongated bowl offers added room and comfort
- Comfort Height® feature offers chair-height seating that makes sitting down and standing up easier for most adults
- Top-mount two-button flush offers a choice of 1.0 or 1.6 gallons per flush (gpf)
- Skirted trapway simplifies cleaning
- Combination consists of the K-4353 bowl and the K-4441 tank
Technology
- Dual-flush technology allows you to choose between a full or partial flush
Installation
- Standard 12″ (305 mm) rough-in
- Two-bolt installation
- Seat sold separately
Water Conservation & Rebates
- Eligible for consumer rebates in some municipalities
- This product can help a building earn Water Efficiency points in LEED® Green Building Rating System
Recommended Products/Accessories
- K-4636 Cachet® Quiet-Close™ elongated toilet seat
- K-5588 Purefresh® Elongated toilet seat
- K-23726 Drain treatment
Included Components
Product consists of
- 4353
- 4441
Additional Components
- Dual flush push buttons
- Installation kit
- Installation template
- Tank accessory pack
- Tank cover
Codes/Standards
- ASME A112.19.2/CSA B45.1
- ASME A112.19.14
- DOE – Energy Policy Act 1992
- EPA WaterSense®
- California Energy Commission (CEC)
KOHLER® One-Year Limited Warranty
- See website for detailed warranty information.
DIMENSION
Technical Information
All product dimensions are nominal.
- Toilet type: Floor-mount
- Waste Outlet: Floor
- Bowl shape: Elongated
- Trap passageway: 2″ (51 mm)
- Water Consumption Full: 1.6 gpf (6 lpf)
- Water surface size: 4-1/2″ x 5-3/4″ (114 mm x 146 mm)
- Rim to water surface: 8-1/2″ (216 mm)
- Rough-in: 12″ (305 mm)
- Seat-mounting holes: 5-1/2″ (140 mm)
Notes: Install this product according to the installation instructions.
IMPORTANT: The rough-in must be 12″ (305 mm) or more from the base of the wall or baseboard. Install or relocate the supply and outlet as necessary to conform to rough-in dimensions.
- If this toilet is installed in new construction, install a new supply stop following the dimensions in the diagram.
- In installations with the supply stop installed, the existing supply stop may need to be relocated if it is less than 8-1/2″ (216 mm) from the centerline of the toilet. Dry fit the toilet to confirm if the supply stop needs to be relocated.
- The supplied hose will extend roughly 6″ (152 mm) from the toilet. If the supplied hose does not reach the supply stop, a longer supply hose may be used.
CONTACT
- 1-800-4KOHLER (1-800-456-4537)
- Kohler Co. reserves the right to make revisions without notice to product specifications.
- For the most current Specification Sheet, go to: www.kohler.com.
2-26-2023 21:11 – US//CA
References
Read User Manual Online (PDF format)
Loading......