SVEN 235 2.0 Multimedia Speaker System User Manual

235 2.0 Multimedia Speaker System
User Manual

235 2.0 Multimedia Speaker System

Congratulations on your purchase of the Sven speaker system!
COPYRIGHT
© 2014. SVEN PTE. LTD. Version 1.0 (V 1.0).
This Manual and information contained in it are copyrighted. All rights reserved.
TRADEMARKS
All trademarks are the property of their legal holders.
NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted efforts to make this Manual more exact, some discrepancies may occur. The information in this Manual is given on “as is” terms. The author and the publisher do not bear any liability to a person or an organization for loss or damage which has arisen from the information contained in this Manual.

BUYER RECOMMENDATIONS

• Unpack the device carefully. Make sure there are no accessories left in the box. Check up the device for damage; if the product was damaged during transportation, address the firm which carried out the delivery; if the product functions incorrectly, address the dealer at once.
• Check up the package contents and availability of the warranty card. Make sure the warranty card has a shop stamp, a legible signature or the seller’s stamp and purchase date, and the goods number corresponds to that in the warranty card. Remember: in case of warranty card loss or discrepancy of numbers you forfeit the right for warranty repairs.
• Do not switch on the speaker system immediately after you bring it into a room from environment with negative temperature! After unpacking, the speaker system should be kept in conditions of room temperature for at least 4 hours.
• Before installing and using the speaker system, read this Manual carefully and keep it for future reference.

PACKAGE CONTENTS

• Active speaker — 1 pc
• Passive speaker — 1 pc
• Operation manual — 1 pc
• Warranty card — 1 pc

SAFETY PRECAUTIONS

CAUTION
RISK OF ELECTRICAL SHOCK DO NOT OPEN
Caution! High voltage inside! To avoid the risk of electric shock do not open or touch elements inside.

• To avoid electric shock, do not open the MSS and do not perform repairs by yourself. Service and repairs should be performed only by qualified specialists in an authorized service center. The list of authorized service centers is available on www.sven.fi.
• Do not allow the circuit of wires (including the grounded ones) between the speakers, on the power amplifier or the ground, for it causes damage to the power amplifier output stage.
• Do not touch the MSS power cord plug pins for 2 seconds after unplugging it from the mains.
• Do not put foreign objects inside the holes of the MSS.
• Protect the MSS from high humidity, water and dust.
• Protect the MSS from heating: do not place it closer than 1 m from a heat source. Do not expose it to direct sunlight.
• Do not place any open flame sources on or close to MSS.
• Do not place the MSS in poorly ventilated areas. Leave an air gap of 10 cm or more. When operating the MSS, do not put any devices on it, do not cover it with cloth or other objects pre- venting it from cooling.
• Do not use any chemical agents for cleaning. Clean it with dry soft cloth only.

TECHNICAL DESCRIPTION

Sven 235 Multimedia Speaker System 2.0 (MSS) is designed to play music and sound games, movies etc. MSS has built-in transformer power supply, acoustic and signal cable due to which it can be connected to virtually any audio source (CD/DVD- players, TV, PC, etc.). The speaker which has audio and control panel is named active one.

Special features

• Built-in transformer power supply
• Speaker system is compatible with PCs, DVD/Media-players, mobile devices and other sound sources
• Built-in signal cable with a 3.5 mm mini-jack to connect sound sources
• Volume control
• Power switch
• Headphone jack
• Plastic case of speakers

Control panel

1. Power LED
2. POWER: power switch
3. VOLUME: volume control knob
4. : headphone jack

PREPARATION AND OPERATION

Speaker placement

• Place the speakers symmetrically to the listener at least one meter away.
• Place MSS far away from monitors and TV sets, as insignificant image distortion in these supersensitive devices is possible.

MSS Connecting
Sven 235 Multimedia Speaker System can be connected to virtually any audio source: DVD/CD, PC sound card, etc. (see Fig. 2).

• Before connecting, make sure that MSS is unplugged.
• Connect signal cable mini-jack 3,5 mm built-in active speaker to audio output of the sound source, as shown in Fig. 2. Use mini-jack to 2RCA adapter (not included) for connection of DVD-player, TV-set etc.
• Plug power cable (fig. 2) of active speaker into the mains outlet.
• Revolve VOLUME knob VOLUME 3 to the minimum; press the button POWER 2 of the active speaker. Power LED 1 will light up.

• Adjust the VOLUME knob VOLUME 3 to the necessary volume.
• Plug headphone into the headphone jack 4 (see fig. 1).

Notes:

• After finishing operation with MSS, mind to unplug power cord of the device from the mains socket.
• To improve sound quality, use Line-Out output of sound card.

TROUBLESHOOTING

the connection.
The power switch is off.| Turn on the switch.
No sound or there is too quiet sound of speakers.| The volume level is set at minimum value.| Adjust the volume control knob.
Improperly connected audio source.| Connect audio sources correctly.
Distortion of sound.| Large amplitude of the input signal.| Turn down the source volume and the MSS volume.

If none of the above methods can solve the problem, please seek professional advice at your nearest service center. Never attempt to repair the product yourself.

TECHNICAL SPECIFICATIONS

Notes:

• Technical specifications given in this table are supplemental information and cannot give occasion to claims.
• Technical specifications and package contents are subject to change without notice due to the improvement of SVEN production.

www.sven.fi

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>