EiKO BOX1-PS150-750-UD-BZ BOX Flood Light Instruction Manual
- June 9, 2024
- EiKO
Table of Contents
EiKO BOX1-PS150-750-UD-BZ BOX Flood Light
SAFETY PRECAUTIONS
- THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
- DO NOT INSTALL ON WOOD SURFACES.
- FOR SUPPLY CONNECTIONS USE WIRE RATED FOR AT LEAST 90°C.
- ASSEMBLE BOX FLOOD LIGHT ONLY WITH BOX/SFACC.
TO AVOID ELECTRIC SHOCK
- MAKE SURE ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
- LUMINAIRE MUST BE CONNECTED TO A WIRING SYSTEM WITH AN EQUIPMENT-GROUNDING CONDUCTOR.
TO AVOID EXPLOSION
- MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE RATED LUMINAIRE VOLTAGE.
- DO NOT INSTALL WHERE THE MARKED OPERATING TEMPERATURES EXCEED THE IGNITION TEMPERATURE OF THE HAZARDOUS ATMOSPHERE.
- DO NOT OPERATE IN AMBIENT TEMPERATURES ABOVE THOSE INDICATED ON THE LUMINAIRE NAMEPLATE.
- KEEP LENS TIGHTLY CLOSED WHEN IN OPERATION.
INSTALLATION
Slipfitter Installation
Trunnion Installation
WIRING DIAGRAMS
Pole Installation Wiring
Wiring Enlarged Illustration
Connect the internal pole cable with the luminaire cable. The neutral line is
connected to the neutral line. The ground line is grounded, and the live line
is connected to the fire line.
Without Sensor or Photocell
With Sensor
With Photocell
With Photocell (0-10VDC)
With Potentiometer
Wiring Diagram for Plug-in Sensor
- EiKO Global | 18000 W. 105th Street, Olathe, KS 66061 | (P) 1-800-852-2217
- EiKO Canada | 81 King St, Barrie, Ontario L4N 6B5 | (P) 1-705-721-5189 eiko.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>