opengear OG-HDTV-SDI-UHD OG HDMI to SDI Converters User Manual

June 4, 2024
Opengear

opengear-LOGO

opengear OG-HDTV-SDI-UHD OG HDMI to SDI Converters

opengear-OG-HDTV-SDI-UHD-OG-HDMI-to-SDI-Converters-
PRODUCT

WHAT’S IN THE BOX

There are two combinations of OG-DA-HDTV-SDI-UHD products

OG-DA-HDTV-SDI-UHD-SET-1

  • 1 x OG-DA-HDTV-SDI-UHD-MB
  • 1 x OG-DA-HDTV-SDI-UHD-RM
  • 1 x R45 to DB9 RS-232 adapter cable

OG-DA-HDTV-SDI-UHD-SET-2

  • 1 x OG-DA-HDTV-SDI-UHD-MB
  • 1 x OG-DA-HDTV-SDI-UHD-RM
  • 1 x R45 to DB9 RS-232 adapter cable
  • 1 x SFP-SDI-12G-Tx for single mode fiber output

Key Features

  • OGX/3.0 card-based form factor
  • Dashboard control enabled
  • Supports HDMI 2.0 video input and loop out
  • Supports up to UHD@60Hz (4:4:4)
  • Supports up to 4096×2160@60Hz input and output
  • Outputs up to 12G SDI
  • Optional 12G SDI fiber output via SFP for SET-2
  • Status LEDs
  • Stereo AES and AA audio monitoring outputs
  • Low power consumption – less than 12W
  • 5-year limited warranty

Specifications

opengear-OG-HDTV-SDI-UHD-OG-HDMI-to-SDI-Converters-1

Rear Modules

opengear-OG-HDTV-SDI-UHD-OG-HDMI-to-SDI-Converters-2

Accessories

opengear-OG-HDTV-SDI-UHD-OG-HDMI-to-SDI-Converters-3

Dashboard Control

Getting Started
The Dashboard software is design to allow you to quickly access the feature sets of openGear form factor cards on a simple User Interface. This section will help you get up and running as quickly as possible.

Running Dashboard
Before you can successfully run the Dashboard software for the first time you must first download it from https://www.opengear.tv/frame-and-control /control-system/download/. Run the downloaded setup file and choose an appropriate installation location on your computer’s storage. Now you can run the Dashboard by double clicking on the Dashboard icon.

OG-DA-HDTV-SDI-UHD Dashboard GUI

OG-DA-HDTV-SDI-UHD is a very straight forward plug and play card. The Dashboard interface does not provide any configuration,opengear-OG-HDTV-SDI-
UHD-OG-HDMI-to-SDI-Converters-4

Appendix A

COPYRIGHT, TRADEMARK, and REGISTRATION
All rights reserved by APANTAC LCC, Beaverton, Oregon, USA. No part of this document may be reproduced in any form or by any means without written permission from the product manufacturer. Changes are periodically made to the information in this document. They will be incorporated in subsequent editions. The product manufacturer may make improvements and/or changes in the product described in this document at any time. The terms HDMI, HDMI High- Definition Multimedia Interface, and HDMI Logo are trademarks or registered trademarks of HDMI licensing Administration, Inc. All other trademark(s), copyright(s), and registered technologies mentioned in this document are the properties of their repective owner(s).

WARRANTY STATEMENT

Apantac LLC (herein after referred to as “Apantac”) warrants to the original purchaser of the products manufactured by Apantac (the “Product,”) will be free from defects in material and workmanship for a period of three (3) year from the date of shipment of the Product to the purchaser. If the Product proves to be defective during the three (3) year warranty period, the purchaser’s exclusive remedy and Apantac’s sole obligation under this warranty is expressly limited, at Apantac’s sole option, to:

  • (a) repair the defective Product without charge for parts and labor or,
  • (b) provide a replacement in exchange for the defective Product or,
  • (c) if after a reasonable time, is unable to correct the defect or provide a replacement Product in good working order, then the purchaser shall be entitled to recover damages subject to the limitation of liability set forth below.

Limitation of Liability
Apantac’s liability under this warranty shall not exceed the purchase price paid for the defective product. In no event shall Apantac be liable for any incidental, special or consequential damages, including without limitation, loss of profits for any breach of this warranty. If Apantac replaces the defective Product with a replacement Product as provided under the terms of this Warranty, in no event will the term of the warranty on the replacement Product exceed the number of months remaining on the warranty covering the defective Product? Equipment manufactured by other suppliers and supplied by Apantac carries the respective manufacturer’s warranty. Apantac assumes no warranty responsibility either expressed or implied for equipment manufactured by others and supplied by Apantac.
This hardware warranty shall not apply to any defect, failure, or damage:

  • a) Caused by improper use of the Product or inadequate maintenance and care of the Product.
  • b) Resulting from attempts by those other than Apantac representatives to install, repair, or service the Product.
  • c) Caused by installation of the Product in a hostile operating environment or connection of the Product to incompatible equipment.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals