KOHLER Single Handle Bathroom Faucet Instructions
- June 9, 2024
- Kohler
Table of Contents
KOHLER Single Handle Bathroom Faucet Instructions
Assembly Instruction
Follow all local plumbing and building codes.
Turn OFF the water supplies.
Your product may appear d’ěeret from the one illustrated. The installation procedure is the same.
NOTE: For two handle wall-mount trim, follow all steps. For single handle wall-mount trim, begin at step 4.
-
8 mm Hex Wrench
-
Install the spout adapter using an 8 mm hex wrench.
-
Turn ON the water supplies and check for leaks.
-
Secure the spout using the 3 mm hex wrench (provided).
-
Flush hot and cold water for 1 minute to remove any debris.
Need help? Contact our Customer Care Center.
- USA/Canada: 1-800-4KOHLER (1-800-456-4537)
- Mexico: 001-800-456-4537
- For service parts, visit kohler.com/serviceparts.
- For care and cleaning, visit kohler.com/clean.
- Patents: kohlercompany.com/patents
This product is covered under the KOHLER ® Faucet Lifetime Limited
Warranty, found at kohler.com/warranty. For a
hardcopy of warranty terms, contact the Customer Care Center.
©2022 Kohler Co.
References
- How to Use KOHLER Cleaning Products | KOHLER
- Kohler Warranty Info: Product Limited or Warranty | KOHLER
- Kohler Co. Portfolio | Innovation and Design | Patents | Kohler | Kohler
- Kohler Co. Portfolio | Innovation and Design | Patents | Kohler | Kohler