AIMO 6XL Label Printer User Guide
- June 9, 2024
- AIMO
Table of Contents
AIMO 6XL Label Printer
Pro Tips
- Each time you change the label, please run the automatic label identification.
- Press the feeder button on the printer to skip a blank label.
- Double click the feed button.
- Avoid poor quality labels as they can damage the printer.
- Regularly clean the print head.
- If the paperisjammed and the blue light is flashing slowly, run the automatic label identification.
- Insert Label Printer into the same USB port on your computer every time. This will avoid creating duplicate copies of the printer in your operating system.
FAQ
Please visit our official website to check FAQ file.
LED STATUS LIGHT
FEED BUTTON
Desired Action
- Run the automatic label identifications: Insert the label, ensure it is straight and smooth. When the printer is standby, press and hold the Feed Button for about3 seconds. Then release the feed Button.
- Piuse pnnti1g: When the printer is printing, press the Feed Button once.
- Resume printing : When the printer pauses printing, press the Feed Button once to resume printing.
- Restore factoy setting : I snort the lubcler sure it is strnight and smooth. I urn off the printer. Press and hold the Feed Button, und Use only approved accessories and do not try to turn on the printer at the same time. disassemble, repair the unit by yourself. After the red light flashness times, then release the feed Button.
- Sensor calbrction (for labels with black marks): Insert the labels with black marks, ensure it is straight and smooth. Turn off the printer. Press and hold the Feed Button, and turn on the printers at the same time. After the blue light flashes 5 times, then release the Feed Button.
- Sensor calbrction (for lucks with gaps: Insert the labels with gaps, ensure it is straight ancsmooth. Turn off the printer. Press and hold the Feed Button, and turn on the printer at the samite After the purple light flashes 5 times, then release the reed Button.
Safety Notices
- The print head may be very hot after printing labels. no not touch the print head.
- Do not bend the power cord excessively or place objects on the cord.
- Do not use the printer if you find any irregularities as these could result ln fire or electrocution.
- Keep the printer out of reach of children. and smooth. I urn off the printer.
- Press and hold the Feed Button, und
- Use only approved accessories and do not try to turn on the printer at the same time. disassemble, repair the unit by yourself.
- After the red light flashness times, then release the feed Button.
- Keep the printer away from water and other objects that could penetrate the components.
- Please unplug the printer when it is not in use for a long time.
Warranty Card
Warning statement:
This ceviche contains licensee exempt transmitter(s) /receivers) that comply with Innovation, Operation is subject to the following two conditions:
- This device may not cause interference.
- This device ms: accept any interference, inducing interference that may cause undesired operation of the ceviche.
exposure statement:
The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
FCC warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(!) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the parry responsible fur complainer
could void the user’s authority to operate the equipment,
Th Ts equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. Th<!SI! limits
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications However,
there is no guarantee that interference will not occur in a particular
instillation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures,
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/live technician fur help.
FCC RF exposure statement: -
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.