NUX NDR-5 Atlantic Delay and Reverb Pedal Owner’s Manual
- June 9, 2024
- NUX
Table of Contents
NUX NDR-5 Atlantic Delay and Reverb Pedal
Copyright
Copyright 2017 Cherub Technology Co. All rights reserved. NUX and Atlantic
Delay & Reverb are trademarks of Cherub Technology Co. Other product names
modeled in this product are trademarks of their respective companies that do
not endorse and are not associated or affiliated with Cherub Technology Co.
Accuracy
Whilst every effort has been made to ensure the accuracy and content of this
manual, Cherub Technology Co. makes no representations or warranties regarding
the contents.
WARNING
IMPORTANT SAFETY INSTRUCTIONS BEFORE CONNECTING, READ INSTRUCTIONS
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to
rain or misère.
CAUTION
To reduce the risk of fire or electric shock, do not remove screws. No
user-serviceable parts inside. Refer servicing to Qualified service personnel.
CAUTION
This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of FCC
Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The lightning symbol within a triangle means “electrical caution!” It indicates the presence of information about operating voltage and potential risks of electrical shock. The exclamation point within a triangle means “caution!” ~ ~lease read the information next1Dall caution signs.
- Use only the supplied power supply or power cord. If you are not sure of the type of power available, consult your dealer.
- Do not place near heat sources, such as radiators, heat registers, or appliances which produce heat.
- Guard against objects or liquids entering the enclosure.
- Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
- Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparahls has been exposed to rain or moishlre, does not operate normally or has been dropped.
- The power supply cord should be unplugged when the unit is to be unused for long periods of time.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and at the point where they exit from the apparatus.
- Prolonged listening at high volume levels may cause irreparable hearing loss and/or damage. Always be sure to practice “safe listening”.
Follow all instructions and heed all warnings KEEP THESE INSTRUCTIONS!
Overview
One of the best Delay and Reverb algorithms in a stomp box. NUX Atlantic Delay
& Reverb pedal has special-selected 3 Delay & 3 Reverb effects with an
additional dreamy Shimmer effect. And now with the NUX’s latest Core Image
technology, Verdugo series are offering one of the best sound enhancements. We
are choosing the best ideas to make it real for musicians.
NUX Atlantic Delay & Reverb pedal also has inside routing control between the
effects, you can choose which effect comes firstly. On serial mode you can
create a deep reflection reverb with wet or dry repeats, or you can split your
guitar signal and add both effects in parallel chain. Each effect will be
mixed with separated dry signals. It has 6.35 mm mono jack input and 2 outputs
you can also connect stereo for the real Delay & Reverb experience. It has an
Input Level toggle switch, you can optimize the input signal with your signal
level.
Features
- 3 Delay Effects 70’s Analog, 60’8 Trope and 80’8 Digital
- NUX SMART TAP with Tap Subdivision Options
- 3 Reverb Effects Spring, Plate and Hall
- Place Reverbs with ShimmAr renal
- MS Input unsort Connection
- Input Level Switch (-1 Dobb / 1 4dB)
- Parallels or Serial Routing
- Stroop Output
- USB Port for firmware updates
Control Panel
Delay toggle switch
70’s (40ms – 400ms)
Retro-delay meets modern technology, without losing the realistic BBD-effected
repeats, so essential for capturing the ?O’s retro feel.
& O’s (55ms – 550ms)
A warm & dusty tape-echo machine effect, packed with an array of analogue-only
goodies. Saturated colors that turn any sound into vintage. Tweak the Repeat
knob to the max and use the Time knob to get an experience, just like the real
Tape-Echo Machine.
BO’S (80ms – BOOms)
A digital era invention, crystal clear repeats. Digitally-copied clean repeats
carries your signal without absolutely zero color particles. This is the best
option if you don’t want to mix your favorite chorus with another colorization
effect–or your favorite modulation effect.
LEVEL (DELAY) knob
Controls the wet/dry balance. Adjusts the volume for your repeats.
REPEAT knob
Varies the numbers of repeats. When set to the MAX sustained runaway will start. You can create an infinite sustained runaway on 60’s Delay mode.
TIME JOB
****Controls the delay time. Turning the Time knob while repeating can produce interesting pitch effects. Time knob also changes the TAP subdivision on TAP TEMPO mode. (See TAP TEMPO).
DELAY LED indicator
11 also shows the TAP TEMPO.
Delay footswitch
Engages and disengages the Delay effect. And activates TAP TEMPO.
TAP TEMPO
Instantly synch-up your delays with the tempo you want to accompany. Simply tap the tempo with your foot. TAP TEMPO Speed range is 125 ms 1500 ms for all delay types.
Delay Pattern
Before you set the TAP TEMPO, use the Time Knob and choose any desired time signature to change the delay pattern. When TAP TEMPO is engaged, your repeats will create a delay pattern according to selected time signature.
TAP Values
1/8, 1/6, 1/4, 1/3, 1/2, 3/4 and 1.
Reverb toggle switch
Spring Reverb
Creates a polyphonic atmosphere filter that catches the sound reflections from
deep down spring reverb tank. You can adjust the tank size with the level knob
and set the reflection distance with the decay knob.
Plate Reverb & Shimmer
Straight and clean reflections inside a flat walled room. You can control the
room-size with the Level knob and then tweak the Delay bounce point with the
Decay knob. If you hold down the Reverb switch, straight reflections will be
heated and swirled throughout the inside of the room creating a Shimmer
effect.
Hall Reverb
The sound of a well-designed hall. Whether the hall size is big or small, the
reflections will be emitted by wall furniture. You can adjust the interior
hall-size, from a small garage to a huge structure with the Level knob and
increase or decrease the number of objects on the walls with the Decay knob.
Less decay means more objects and faster reflection fading.
LEVEL(REVERB)knob
Controls the balance of wet signal and dry signal. Adjust the Reverb level and size of the area.
DECAY knob
Controls the decay time of the wet signal Range can depends on selected reverb type.
Reverb LED indicator
Reverb footswitch
Engages and disengages the Reverb effect And controls the Shimmer effect.
Shimmer: Choose Plate Reverb. Then hold the Reverb foot-switch (as long as you want) until your effect takes flight. The effect will fade-out when you release the foot-switch.
1/0 Jacks
Input
6.35 mm Insert jack.
Input Level toggle switch
Adjusts the input headroom. If the input signal is too strong, switch to +4 dB to increase the headroom.
Routing toggle switch
You can use the Delay and Reverb effect with parallel or serial connection. In serial mode, you can change the signal routing. Before plug-in the power cable, hold one of the effect footswitch which you want to come firstly, then plug-in the power cable.
Stereo Outputs
Use the right output for mono connection.
Micro USB port
Connect to PC for firmware update.
DCjack
Connection Method
Atlantic’s input jack can support stereo cable as insert (send/ return) method. Please see the blow two drawings:
Using ”Y” cable connection
Using insert cable connection
Inside Routing
DElAY first
REVERB first
Parallel Routing
Specification
- Sampling rate: 44.1 kHz
- AID Converter: 32bit
- Signal Processing: 32bit
- Frequency Response: 20Hz-20kHz
- THD+N: -1 ODBC (A- Weighting)
- Dynamic Range: 102dB
- Input Impedance: 1 MO
- Output Impedance: 1 k
- Power: 9V DC (Negative tip, Optional ACD-006A adapter)
- Dimensions: 105mm(L) x 115mm(W) x 57mm(H)
- Weight: 420g
Accessories
User manual, Warranty card
Specifications and features are subject to change without notice
Made in China
Documents / Resources
| NUX
NDR-5 Atlantic Delay and Reverb
Pedal
[pdf] Owner's Manual
NDR-5, Atlantic Delay and Reverb Pedal, NDR-5 Atlantic Delay and Reverb Pedal,
Delay and Reverb Pedal, Reverb Pedal
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>