Shark ZS341 Series Rocket DuoClean UltraLight Vacuum User Manual

: June 9, 2024
: Shark

Table of Contents

Shark ZS341 Series Rocket DuoClean UltraLight Vacuum User Manual
WHAT’S INSIDE
ASSEMBLY
VERSATILE FLOOR-TO-CEILING CLEANING
- Settings
- Upright Mode
STORAGE
DUST CUP
MAINTENANCE
DOWNLOAD
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Shark ZS341 Series Rocket DuoClean UltraLight Vacuum User Manual

Shark ZS340 Series Rocket UltraLight Vacuum

ZS341 Series
QUICK START GUIDE

[Please be sure to read the enclosed Shark® Owner’s Guide prior to using your vacuum.]

WHAT’S INSIDE

A. Handheld Vacuum
B. Zero-M® Cleaner Head
C. Wand
D. 12˝ Crevice Tool
E. Pet Multi-Tool

ASSEMBLY

VERSATILE FLOOR-TO-CEILING CLEANING

Settings

OFF:

Slide switch to the bottom to turn off power. To begin vacuuming, slide switch to the appropriate setting.

SETTING I:

Bare Floor/Small Area Rugs
The brushrolls spin slowly to clean bare floors and delicate area rugs.

SETTING II:

Carpet
The brushrolls spin faster to pick up debris below the surface of your carpets.

NOTE : For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use Setting II, Carpet.

NOTE : Select Carpet for stuck-on dust and debris.

Upright Mode

To clean floors, place foot on floor nozzle and tilt handheld vacuum back.

Above-Floor with Wand:

Stand the vacuum upright. Step on the foot pedal on the bottom left side of the floor nozzle and pull the wand up to disconnect it. Great for cleaning baseboards, ceiling fans, window sills, etc.

Above-Floor with Handheld:

bove-Floor

Press the WAND RELEASE button and lift the handheld vacuum off the wand. Great for cleaning stairs and furniture.

NOTE : All accessories are compatible with both the wand and the handheld vacuum. Use Setting I for all above-floor accessories.

STORAGE

Onboard Hook:

Onboard Hook

Hang the handheld vacuum on the hook on the bottom of the wand, and wrap the power cord around the cord hooks.

DUST CUP

Empty dust cup every time debris reaches the MAX fill line.

DUST CUP

To remove the dust cup from the handheld vacuum, squeeze the two Dust Cup Release buttons at the same time and pull out the dust cup. Press the Empty button on the front of the dust cup.

With the dust cup attached to the handheld vacuum, press the Empty button on the front of the dust cup.

MAINTENANCE

Brushroll/Soft Roller Access

1. To open the brushroll garage, slide both release buttons on the floor nozzle away from you, towards the back of the nozzle, then lift off the lid.
2. To close the brushroll garage, insert the 3 tabs on top of lid into the 3 slots in the nozzle, then push down on both sides of lid until it clicks securely into place. If Brushroll Indicator Light isn’t green and headlights are flashing, check again that both sides of lid are locked in place.

Brushroll Maintenance

With the garage lid removed, carefully clear away any debris that may be impeding the brushroll.

Brushroll

NOTE : If you see any hair wrapped around the brushroll, continue cleaning, using Setting II, Carpet, on bare floors. This will allow Zero-M® technology to remove the hair wrap and send it to the dust cup.