ZJINNOVA KB-T1 Interconnect Tesla Box Instructions
- June 9, 2024
- ZJINNOVA
Table of Contents
ZJINNOVA KB-T1 Interconnect Tesla Box
WHAT’S INCLUDE
Different types of usb cable can be purchased according to your car
Connection between Box and Mobile Phone
Tesla Box supports multiple mobile phone interconnection methods: Wireless CarPlay, Wireless Android Auto, Wireless CarLife,Apple /Android Mirroring
Box Interface Display
Connection Relationship
Box Power Supply
Usb 5V power supply is used in Tesla box , and it is recommended to use the on-board charger interface for power supply
Connection Box and Tesla
The first step is how to connect the box: Tesla machine needs to connect
to the wifi hotspot of the interconnection box first, select and connect the
box hotspot (named Tsl – **) on the wifi connection interface of Tesla’s
large screen, and check “Remain connected in drive” in the wifi settings.
The initial password is:** 1234678
Open Tesla Browser
- Step 1: Open the browser as shown in the figure.
- Step 2: How to connect the box with the machine: Input the box domain name www.zbox link and click the favorites button on the right to add the domain name to the favorites for easy use next time.
Connection between the Box and CarPlay
To use wireless CarPlay, it is needed to connect the box Bluetooth (named
Tsl – ****) After the first use, it will be automatically connected next time.
Connection between the Box and Android Auto
To use wireless Android Auto, it is needed to connect the box Bluetooth
(named Tsl – ****) After the first use, it will be automatically connected
next time.
Connection between the Box and CarLife
To use wireless CarLife, it is needed to connect the box Bluetooth (named
Tsl – ****) After the first use, it will be automatically connected next time.
AirPlay Connection between the Box and iPhone
- Step 1: Switch the “CAST” on the page.
- Step 2: Connect phone with box wifi.
- Step 3: Enter the AirPlay and select the zj-airplay.
OTA
- Step 1: Connect the mobile phone to the box hotspot.
- Step 2: Input 3.3.3.3 in the browser and click “check for updates”.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Beijing Zhijian Technology Co., Ltd.
186 1132 5210
product@zjinnova.com