KONNEK STEIN ePR0-AEO3 True Wireless Earbuds User Manual
- June 5, 2024
- KONNEK STEIN
Table of Contents
User Manual
ePRO-AE03
FCC ID: 2AVTM-EPRO-AE03
Thank you for purchasing the ePRO-AE03 True Wireless Stereo earbuds. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number. The wireless charging function of the charging box only receives.
What’s In The Box?
Specifications
Model | ePRO-AE03 |
---|---|
Bluetooth Version | 51 |
Bluetooth Agreement | A2DP / AVRCP/HSP/ HFP |
Charging Time | ≈ 2h |
Battery Life | ≈ 20h (with case) |
≈ 5h ( earbuds only)
Impedance| 32Ω
Maximum Output Power| 5mW
Frequency Range| 20Hz-20KHz
Microphone Sensitivity| -38dB@1KHz
Battery Capacity| 40mAh*2(earbuds) 500mAh (charging case)
transmission Distance| 10m
Product Weight| 48g/4g (each earbud)
Charging Voltage| DC 5V
Waterproof Rate| IPX4
PRODUCT DETAILS
Please charge the earbuds and the charging case for at least 15 minutes for
the first time before first use.
HOW TO WEAR
Choose the right earbuds
Appropriate sizes of earbuds are essential to the noise cancellation
experience, sound quality, and comfort. Please try on different sizes of
earbuds. Please note that you may need to use different sizes of earbuds for
your left and right ears. Wearing earbuds
In order to obtain a better noise cancellation effect, the wearing angle can
be adjusted appropriately after wearing, so that the earbuds are slightly
pushed into the ear canal.
Battery Life and Charging
Battery life
In Bluetooth mode, the earbuds can last for 5 hours of continuous play. Using
the charging case can be extended to 25 hours.
Power display
The red light is on when the battery is 0-30% remaining, the yellow light is
on when the battery is 31%-70% remaining, and the green light is on when the
battery is 71%-100% remaining.
Earbuds Charging
Place the earbuds in the charging case and they will automatically shut down
and begin charging.
Case Charging
The wireless charging function of the charging box only receives
TOUCH OPERATION
Touch Control| |
---|---|---
Music Play/Pause| Tap| Tap
Next Track| | Double-tap
Previous Track| Double-tap|
Answer| Tap| Tap
Hang Up| Long-press 2s| Long-press 2s
Decline Call| Long-press 2s| Long-press 2s
Activate Voice
Assistant| Triple-tap| Triple-tap
Standard Mode /Transparency Mode /ANC Mode| long-press 2s| long-press 2s
Automatic Connection
Paring
Starting with the earbuds in the case:
- Take the left and right earbuds out of the case. They will automatically turn on and connect with each other within 3 seconds.
- After the earbuds have connected each other successfully, the red and blue light will flash for paring.
- Open the Bluetooth search on your mobile phone, and connect the device. Then the mobile phone displays the pairing name as”Konnek Stein 03″.
- The earbuds start flashing blue for one second if the earbuds have connected successfully.
- Please enter “0000” if a code or PIN code is required to pair.
Automatic remote connection
- When used again, double earbuds will pair each other and return to the last pairing device automatically.
- In pairing mode, the earbuds will automatically turn off after 5 minutes if no devices are paired.
- Place the earbuds in the charging case then close the charging case, they will automatically shut down and begin charging.
- If the Bluetooth connection is lost, they will automatically begin pairing.
Reset
You might need to reset your earbuds if you experience any connectivity problems or function issues.
- Place the earbuds in the charging case and keep the case open.
- Press and hold the button on the side of the case for 6 seconds until the LED indicators flash red.
NOTE:
- Put the earbuds in the charging case and take them out again if it has no sound output.
- The maximum wireless operating range is 10m (33ft). If the connection range is exceeded, the earbuds will enter the back-connection mode and can pair with other devices at the same time.
SAFETY INSTRUCTIONS
- Do not place the earbuds in extremely high or low ambient temperatures for an extended period of time. Extreme temperatures will cause the device to deform.
- Use electronic equipment with caution during thunderstorms.
- Keep out of reach of children. If any part is swallowed by accident, seek medical care immediately.
- Over exposure to excessive sound, levels can damage your ears resulting in permanent noise-induced hearing loss. Please use an appropriate sound level when using the earbuds.
BATTERY WARNING
This product contains a lithium battery. Please do not disassemble, strike,
crush, or place the product into contact with flames. Do not expose to high
temperatures or direct sunlight for a prolonged period. If there is any
swelling, leakage, odor, or any other abnormality in the battery compartment
of the product, cease use immediately. Please dispose of used batteries
properly and in accordance with local regulations.
READ ALL INSTRUCTIONS BEFORE USE AND SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1)this device may not cause harmful interference.
and (2)this device must accept any interference received, including
interference that may cause undesired operation.
FCC RF EXPOSURE STATEMENT :
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This device complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
CAUTION
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
The wireless charging function of the charging box only receives.
Made in China
Customer Service
Email: customerservice@ttinno.com
If You need any support, you want to share any content, you are very welcome
to contact us.