ANLY ET7-1 Twin Output Weekly Programmable Timer User Manual
- June 9, 2024
- ANLY
Table of Contents
ANLY ET7-1 Twin Output Weekly Programmable Timer User Manual
RESTRICTIONS ON USE
When using this product in applications that require particular safety or when using this product in important facilities, please pay attention to the safety of the overall system and equipment. Install fail-safe mechanisms perform redundancy checks and periodic inspections and adopt other appropriate safety measures when it is necessary. This product is rated at Class Ⅱ
SPECIFICATIONS
Operating voltage| AC/DC : 100 – 240V
Allowable operating
voltage range
| 85 ~ 110% of rated operating voltage
Rated frequency| 50 / 60 Hz
Contact rating| 240VAC 7A(N.O.), 240VAC 5A(N.C.) Resistive load
Status Indicator| POWER – Green, Out1/Out2 – Green
Power consumption| Approx. 5.6VA (at 220VAC)
Life| Mechanical : 5,000,000 times / Electrical : 100,000 times
Ambient temperature| -10 ~ +50℃ (without condensation & freezing)
Ambient humidity| MAX 85% RH (without condensation)
Altitude| MAX 2000m
Weight| Approx. 200g
BUTTON, SWITCH and LCD FUNCTIONS
DIMENSION(mm)
SAFETY PRECAUTION| This manual uses the following symbols to ensure safe
operation of this timer.| WARNING| CAUTION
---|---|---|---
WARNING Warnings are indicated when mishandling this controller might result
in death or serious injury to user.
CAUTION Cautions are indicated when mishandling this controller might result in minor injury to the user, or only physical damage to the timer.
| Note this incorrect wiring of this controller can damage it and lead to other hazards. Make sure the controller has been correctly wired before turning the power ON.
Before wiring, or removing / mounting the controller, be sure to turn the power OFF. Failure to do so might cause electric shock.
Do not touch electrically charged parts such as the power terminals. Doing so might cause electric shock.
Do not disassemble the controller. Doing so might cause electric shock or faulty operation.
| Use the controller within the operating ranges recommended in the specification (temperature, humidity, voltage, shock, mounting direction, atmosphere and etc.). Failure to do so might cause fire or faulty operation.
Firmly tighten the terminal screws. Insufficient tightening of terminal screws might cause electric shock or fire.
Press reset before use after turning the battery on or replace the battery.
