NOTIFIER NBG-10 Series Manual Pull Station Instructions
- June 9, 2024
- NOTIFIER
Table of Contents
NOTIFIER NBG-10 Series Manual Pull Station Instructions
Installation Drawing
Note: The switch rating is 3 amps @ 30 Volts AC/DC
- Denotes solder connection
NBG-10, NBG-10L, NBG-10WP, NBG-10SP, NAR-10
Description
The NBG-10 Series is a non-coded, dual-action, normally-open manual pull station with the following options: NBG10A (with AUX. switch); NBG-10L (with key for reset); NBG-10P (with key for presignal or test); NBG-10N (without terminal block); NBG-10WP (BG-10 enclosed in a weatherproof backbox).
NBG-10 Series Operation
When the dual-action door is pushed in and the handle pulled down, the N.O.
push-type switches will close. The handle cannot be restored to its normal
position until the station is manually reset by unscrewing the hex screw and
pivoting the case downward, away from the backplate. When the handle is
restored, return the case to its normal position and secure with the hex
screw. Note: The NBG-10L utilizes a mechanical key instead of a hex screw. The
microswitch of the NBG-10P/T is activated by rotating a key clockwise. The key
cannot be removed while in this position.
12 Clintonville Road, Northford, CT 06472 203-484-7161 FAX: 203-484-7118
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>