NOTIFIER MPS-400 Main Power Supply Replacement Board Instruction Manual

MPS-400 with Keltron RCVR/XMTR Wiring Diagram

50812 Revision A1
March 5, 1999

ECN 99-107

Keltron 95M3158 TTM-RPS

1. Terminals 7 and 8: Remote station alarm/trouble inputs.
2. Terminals 9 and 10: Sprinkler supervisory input.

CAUTION!

For reasons of wiring diagram clarity, terminal designations of Keltron modules are not shown in actual order. Follow Keltron manual and module markings for exact terminal locations to prevent severe module damage!

1. KELTRON* 95M3158 TTM-RPS UL Listed

2. KELTRON* 95M3083 TRM-RP UL Listed

3. TO REMOTE* STATION

4. REL-3.3K

5. • TO POWER SUPPLY

6. ALARM/TROUBLE SIGNAL

7. SPRINKLER SUPERVISORY SIGNAL

8. • For more information, refer to Keltron manual

9. NOTE: Cut TBL Jumper on 4XTMF module to send alarm/trouble signals from the same pair of terminals
   TROUBLE = NO SIGNAL

10. Note: Switch S4 on MPS-400 must be in the down position.

11. LENA	TB	+	–

    AFP-400
    AFP-300| 2| 1| 2

www.pdf-zoo.com

firealarmresources.com

Documents / Resources

| NOTIFIER MPS-400 Main Power Supply Replacement Board [pdf] Instruction Manual
MPS-400, MPS-400 Main Power Supply Replacement Board, Main Power Supply Replacement Board, Power Supply Replacement Board, Replacement Board, Board
---|---

References

• Fire Alarm Resources | Download fire alarm documents

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>