DT Research ACC-001-36 Battery Holster with Bracket User Guide
- June 9, 2024
- DT Research
Table of Contents
DT Research ACC-001-36 Battery Holster with Bracket
BASIC OPERATION GUIDE
Thank you for purchasing the Battery Holster by DT Research. The Battery Holster (ACC-001-36) is designed to be a charging case as well as a portable power bank while three fully-charged DR202 batteries (optional) are stored inside. The package includes one Battery Holster which features three battery slots with lockable gate as well as three DC-out connectors, one holder and three cables.
Instructions:
Insert the DR202 batteries inside the Battery Holster one by one in the
correct direction and lock the lid. To use as a portable power bank, connect
the cable(s) to the Battery Holster and the DT Research product and/or the
peripheral(s).
To use the external LED indicator, connect the indicator’s cable to the
Battery Holster. Make sure the pins are connected properly.
After connecting the cable(s) to the Holster, you may also attach the cable
holder onto the bottom of the Holster to fix the cable(s).
CAUTION:
This Battery Holster must only be used with the specific DR202 battery, DT
Research product models and peripherals for which it is designed. Failure to
do so may result in tablet or charger damage, or personal injury.
Package Contents
- Battery Holster with bracket
- External LED indicator
- Cables and the holder
- Basic operation guide
Battery LED Status
- Blue indicates the battery voltage is over 10.2V
- Orange indicates the battery voltage is lower than 10.2V
Precautions
- Always exercise care when operating and handling.
- Do not disassemble any portion of the holster as this will void any product warranty.
- In the unlikely event that abnormal noise, strange odor, or smoke is present, immediately disconnect all power sources. Please report the problem to your device provider immediately.
Specifications
I/O Ports
DC-out Connector| 1 (2.5mm for 12V), 1 (1.35mm for 15V) and 1 (1.7mm for 19V)
with exclusively designed cables
Battery Slots| 3 with lid
External LED indicator Connector| 1
Mechanical and Environmental
LED Indicators| Built-in and external LED indicators for battery power
status
Battery Support| 3 DR202 Li-Ion batteries; 11.1V, 7800mAH (optional)
DC-out| 12V, 4.16A; 15V, 1A and 19V, 3.16A
Enclosure| Aluminum + ABS plastics
Dimensions (H x W x D)| 7.3 x 3.6 x 4.7 in/ 185 x 92.6 x 120 mm
Weight| 4.72 lbs/ 2.14 kg (with holder)
Regulation| FCC Class B, CE, C-Tick, RCM, MEPS, RoHS compliant
Temperature| Operation: 0°C – 40°C; Storage: -20°C – 60°C
Humidity| 0% – 90% non-condensing
Specifications subject to change without notice.
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com
Copyright © 2018, DT Research, Inc. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>