Clinton Electronics CE-PS102 Power Over Ethernet Installation Guide
- June 9, 2024
- Clinton Electronics
Table of Contents
Clinton Electronics CE-PS102 Power Over Ethernet Installation Guide
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT DISASSEMBLE. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICE TO QUALIFIED PERSONNEL.
WARNING:
- To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture. Do not install power supplies in places with high moisture or near water.
- This installation should be made by qualified service personnel and should conform to all local codes and in accordance with the National Electrical Code.
- For Indoor Use Only!
- Risk of electrical shock and/or equipment damage. Disconnect power before servicing this appliance.
- Measure output voltage before connecting devices. This helps avoid potential damage.
Wall Mount – Optional
Measure approximate 3-15/16″ (100mm) and make two marks. Insert appropriate
screws into desired mounting surface, leaving enough of the heads of the
screws exposed to hang the PoE Injector on. Guide the PoE Injector onto the
two screws and hang in place.
Interlocking Slide Mount – Optional
If desired, multiple PoE Injectors can be attached together. To attach, align
the raised rail to from one PoE Injector to the slotted side on a second PoE
Injector. Slide together until they snap in place.
INSTALLATION:
- Connect CATSe/CAT6 cable from switch/hub to connector on CE-PS102 marked Data IN.
- Connect CAT5e/CAT6 cable from IP camera or other network device to connector on CE-PS102 marked PoE OUT.
- Connect AC power cord from PoE Injector to main power source.
- During boot-up the LEDs should illuminate GREEN if proper power and PoE connections have been made. If LED indicators are not illuminated check cable connections.
Pin Assignment
- Power – (negative)
- Power – (negative)
- Power+ (positive)
- Data
- Data
- Power +(positive)
- Data
- Data
clintonelectronics I 6701 Clinton Road Loves Park, IL 61111 I 800.549.6393 (Support) I www.clintonolectronics.com