DT Research 313Y/MD Rugged Tablets Medical Cart Computers and AIO Computers Instruction Manual
- June 9, 2024
- DT Research
Table of Contents
Medical Tablet
BASIC
OPERATION GUIDE
313Y/MD, 313MQ
INTRODUCTION
Thank you for acquiring the 313Y/MD, 313MQ, part of DT Research’s line of Medical Tablets. Featuring a slim yet robust enclosure, the 313Y/MD, 313MQ with 13.3” TFT display is powered by the Intel® Core™ i quad-core or Qualcomm octa-core processor, offering optimal combinations of performance and power savings. The 313Y/MD, 313MQ is available with Microsoft® Windows® or Android operating system. The software operating system features web browser, client/ server computing software, media player, accessories, and applications support.
PACKAGE CONTENTS
- One 313Y/MD, 313MQ with Battery Pack and Handstrap
- AC-DC Power Adapter with Power Cord
- Basic Operation Guide
Input/ Output Ports
A Smart Card Reader (313MD only)
B Headphone-out
C Ethernet Port
D USB 3.0 Ports
E USB Type-C (power input)
Button Functions
| BUTTON | ACTION |
|---|---|
| 1 | Brightness Control Buttons |
| 2 | Programmable Buttons |
| 3 | Power Button |
| 4 | Battery Latch |
Power/Battery LED Status:
- Blue indicates the battery is 25% to 100% charged
- Blinking blue indicates the battery is charging
- Orange indicates that the battery is between 11% to 25%
- Blinking Orange indicates that the battery is below 10%
PRECAUTIONS
-
Always exercise care when operating and handling the 313Y/MD, 313MQ
-
Do NOT apply excessive pressure to the display screen.
-
We recommend using the Digital Pen (optional) to keep the screen clean.
-
Avoid prolonged exposure of the display panel to any strong heat source.
Wherever possible, the 313Y/MD, 313MQ should face away from direct light to reduce glare. -
If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any AC-DC adapter other than the one provided or acquired from the manufacturer or its partners.
-
In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power off the 313Y/MD, 313MQ and disconnect all power sources.
Report the problem to your device provider immediately. -
Never attempt to disassemble the 313Y/MD, 313MQ, as this will void the warranty.
BASIC FEATURES
The 313Y/MD, 313MQ wireless tablet integrates a bright and multi-touch display, USB ports, and embedded networking elements such as wireless LAN. The 313Y/ MD, 313MQ is complemented by a suite of accessories, including battery expansion, charging cradles, and battery charger kit, for a comprehensive user experience. A 313Y/MD, 313MQ typically integrates an 802.11ac wireless LAN (WLAN) adapter that may connect to other wireless devices or access points. If your 313Y/MD, 313MQ does not come with such a network adapter, please consult your device provider to establish the desired network connectivity.
OPERATION
Powering ON and OFF
To activate the 313Y/MD, 313MQ, push and quickly release the Power Button. The
display will come on in a few seconds. To put the 313Y/MD, 313MQ in Standby
mode,
push and quickly release the Power Button. To turn the 313Y/MD, 313MQ off for
extended storage, power off safely using any software function that “shuts
down computer” provided in the software operating system.
NOTE:
The battery packs shipped with your tablet may be low in power—please use the
AC-DC adapter with the 313Y/MD, 313MQ when setting up for the first time to
fully charge the internal battery pack.
NOTE:
When the batterypack(s) is (are) charging, the blue-colored Battery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking
activity and the LED stays dark, the battery pack(s) may have been drained
substantially. Try unplugging/ replugging the AC-DC adapter to the 313Y/MD,
313MQ a few times to activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the
tablet in “Standby” mode while not in use. Pushing briefly on the same button
will wake up the system within seconds.
NOTE:
For 313MD, avoid using the Power Button (“hold 4+ seconds” feature) to turn
off the tablet—this form of hardware shutdown is intended to be a means of
recovery from lockups, and not as normal operation.
Start Up
If the power up (from Standby mode or otherwise) is successful, the
appropriate interface will be displayed after a launch sequence of several
seconds. The wireless LAN connection may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The 313Y/MD, 313MQ may be configured using the utilities and methods dictated
by the software operating system. The 313Y/MD, 313MQ should be configurable
for various properties such as user profiles, network features, and several
system elements.
Wireless Networking
Wireless LAN
The 313Y/MD, 313MQ is often delivered with an embedded (user-inaccessible)
802.11ac WLAN adapter equipped with a hidden custom antenna.
-
Through the support of typical WLAN adapters, the 313Y/MD, 313MQ should be able to detect all 802.11 access points in the vicinity for you to select the access
point of your choice for connection. -
The SSID and WEP/WPA/WPA2 (if enabled) parameters on the 313Y/MD, 313MQ and the access points have to match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure access.
-
When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your networking equipment literature to properly configure associated settings such as Authentication mode, etc.
-
Refer to the access point operating manuals for setting up the 802.11 access points.
USING THE MOBILE TABLET
Peripherals Support
Through its USB ports, the 313Y/MD, 313MQ supports a wide range of USB-based
peripherals. These peripherals are applicable for software installation,
applications storage, data storage, and system software recovery and updates.
For More Support
Users can download the Tablet Modules Basic Operation Guides from the DT
Research website.
To Hold the Tablet
Left hand: grip the left back side of the tablet with your left hand four
index fingers, with thumb resting on the top of the back side of the tablet
and palm securely against the back. Right hand: grip the right back side of
the tablet with your right hand four index fingers, with thumb resting on the
top of the back side of the tablet and palm securely against the back.
Federal Communication Commission Interference
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
This Class [B] digital apparatus complies with Canadian ICES-003.
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2022, DT Research, Inc. All Rights Reserved.
BOG012722 313Y/MD, 313MQ
www.dtresearch.com
Documents / Resources
| DT
Research 313Y/MD Rugged Tablets Medical Cart Computers and AIO
Computers
[pdf] Instruction Manual
313Y MD Rugged Tablets Medical Cart Computers and AIO Computers, 313Y MD,
Rugged Tablets Medical Cart Computers and AIO Computers, Cart Computers and
AIO Computers, AIO Computers
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>