IOGEAR GCS82DPC 2-port 4k Kvm Switch with Displayport Usb c And Audio User Guide
- June 9, 2024
- Iogear
Table of Contents
IOGEAR GCS82DPC 2-port 4k Kvm Switch with Displayport Usb c And Audio
Package Contents
- 1 x GCS82DPC
- 1 x Quick Start Guide
- 1 x Warranty Card
System Requirements
Console:
- DisplayPort monitor
- Standard wired USB keyboard
- Standard 3-button wired USB mouse
- Speakers and microphones (optional)
Computer:
- DisplayPort port and USB-A port
- USB Type-C port with DisplayPort Alt Mode enables USB-C connection to carry Display Port signals
- Audio ports (optional)
Operating Systems:
- Windows® ?, 8.1, 10, 11
- Mac OS® 9.0+
- Linux®, UNIX®, and other USB supported systems
Overview
- Port LEDs
- USB port for keyboard and mouse
- DisplayPort for monitor
- 3.5 mm audio input port
- 3.5 mm audio output port
- Micro USB power port
- Remote port switch button
- KVM Cables – Microphones
- KVM Cables – Speakers
- KVM Cable – USB-A
- KVM Cable – DisplayPort
- KVM Cable – USB-C
Hardware Installation
-
Step 1
Console section: Connect to microphone, speakers, keyboard, mouse, DisplayPort monitor -
Step 2
Computer section: Connect to the DisplayPort computer with the DP, USB and audio cables. Connect to the USB Type-C computer with USB-C and audio cables.
Limited Warranty
This product carries a limited or lifetime manufacturer’s warranty.
For terms and conditions visit
https://www.iogear.com/support/warranty.
Register online at https://www.iogear.com/register
Important Product Information
- Product Model ———
- Serial Number __
Contact
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
- Visit www.iogear.com for more product information
- Visit www.iogear.com/support for live help and product support
IOGEAR
iogear.custhelp.com
support@iogear.com
www.iogear.com
EMC Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital service, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. Any changes or modifications made to this equipment
may void the user’s authority to operate this equipment. This equipment
generates, uses, and can radiate radio frequency energy. If not installed and
used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio TV technician for help
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
CE Statement:
This device has been tested and found to comply with the following European
Union directives:
Electromagnetic Capability
(2014/30/EU) and Low Voltage (2006/95/EC).
© 2022 IOGEAR
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>