NITECORE TSL10i Signal Light Tailcap User Manual
- June 9, 2024
- Nitecore
Table of Contents
NITECORE TSL10i Signal Light Tailcap
Technical Data
Runtime
| Blue Flashing| 330h
---|---|---
Red Flashing| 360h
Green Flashing| 300h
White Flashing| 300h
Red/Blue Police Warning Flashing| 72h
Dimensions| Φ32mm×46.2mm (Φ1.26″×1.82″)
Weight| 34g (1.2oz)
Note: The stated data is measured using 1 x 21700 Li-ion battery (5,000mAh) without turning on the flashlight under laboratory conditions. The data may vary in real world use due to different battery usage or environmental conditions.
Operating Instructions
Power Button: A tactical tail switch available with constant-on/off and momentary-on illumination.
Mode Button (STROBE READY™): For output adjustment with STROBE READY™ Technology to enable a quick access to STROBE Mode. (Patent No.: ZL201320545349.4)
Signal Light
- On:
- When the signal light is off, long press the Signal
- Light Button for over 1 second to turn it on.
- Off:
- When the signal light is on, long press the Signal
- Light Button to turn it off.
- Mode Switching: When the signal light is off, keep holding the Signal Light Button after turning it on to cycle through the following modes: Blue Flashing – Red Flashing – Green Flashing – White Flashing – Red/Blue Police Warning Flashing. Release to select the current mode.
(The signal light has mode memory. When reactivated, it will automatically access the previous memorized mode.)
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.
Warnings
- The product is only applicable to i-Generation Flashlights.
- Please screw to fully tighten the product before use to avoid malfunctions due to an unstable
Warranty Service
- All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective / malfunctioning NITECORE® products can be repaired free of charge within 12 months from the date of purchase. Beyond 12 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.
- The warranty will be nullified if
- the product(s) is/are broken down, reconstructed and/or modified by unauthorized
- the product(s) is/are damaged due to improper use. (e.g. reversed polarity installation)
- the product(s) is/are damaged due to battery leakage.
- For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to [email protected]
- All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occur between this manual and information specified on www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.
Worldwide Warranty Service
This is the certificate of authenticity if this item and we confirm that it
has been subjected to the most exacting quality controls by SYSMAX Innovations
Co., Ltd.
NOTE: Please ensure this warranty card is fully completed by the
distributor or retailer after purchasing the product. Should the product fail
to operate correctly during the warranty period, it may be returned with the
completed warranty card and original sales receipt to the retailer or local
distributor for replacement or repair.
Customer Service Email: [email protected]
ABOUT COMPANY
- STEYLSMAX Innov6 at0ions Co., Ltd
- TEL: +86-20-83862000
- FAX: +86-20-83882723
- E-mail: [email protected]
- Web: www.nitecore.com
- Address: 24/F, TCL Plaza, No. 18 Haizhou Road, Haizhu District, Guangzhou, 510335, Guangdong, China