Selens M650 Wall Mount Boom Arm with Triangle Base User Manual
- June 9, 2024
- Selens
Table of Contents
Selens M650 Wall Mount Boom Arm with Triangle Base
Expansion Screw Installation
- Model: M6*50
- 4 expansion screw included.
- After the screws are driven into the wall, tighten the nut, the big end of the bolt expands the mental sleeve, which helps to install the boom firmly on the wall
Notes: Suitable for concrete walls.
STEP 1
Use a drill to make a hole, diameter is 0.315inch/8mm, the depth of the hole
should be over 2.16inch/55mm.
STEP 2
After the screw connected to the product, put it into the hole.
STEP 3
Tighten the screw with a wrench, the inside of the screw will be
lock.
INSTALLATION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>