AJAZZ AJ52 Pro Three Mode Gaming Mouse User Guide

June 3, 2024
AJAZZ

AJ52 Pro Three-Mode Gaming Mouse
User Guide

AJ52 Pro Three-Mode Gaming Mouse

Thank you very much for purchasing our AJAZZ AJ52Pro three-mode gaming mouse. This product has various cool functions and lighting effects. I hope it can bring you a new operating experience. For more enhanced settings and functions, you can download and install the driver: http://www.a-jazz.com/

Product Specifications

Brand: Ajazz
Item model number: AJ52Pro
Transmission method: BT/2.4G/wired USB
Interface type: Type-c interface
Product size: 125x69x37mm
Product weight: about 95g
Shell material: ABS
Number of keys: 8key
Wire length: 1.8M
Product chip: PAW3325 DIP adjustment: 800-10000 (six-speed DPI drive adjustable)
Support system: WindowsXP/Vista/Windows7/8/10/11

Button Function Description

  1. Left button

  2. Right button

  3. Middle button (wheel button)

  4. Forward key

  5. Back key

  6. DPI+ 0DPI-
    DPI indication (roller + LOGO indication): 800 [red] 1200 [green] 1600 [blue] 2400 [yellow] 3200 [blue] 10000 (purple], default: 1200 [green]

  7. Light effect switch: switch the backlight mode

  8. Function switching key: push up the Bluetooth mode – middle power off- push down the 2.4G mode (switching the blue light for 5 seconds in the Bluetooth mode means/ switching the 2.4G mode the green light is always bright for 5 seconds / inserting the USB to automatically enter the wired mode)

Mode Function Description

2.4GMode:
Receiver Code Pairing: After the 2.4G mouse is powered on, press the (left + middle + right) keys at the same time for 3 seconds, the yellow light of the scroll wheel flashes rapidly to enter the code pairing state, and the code pairing is successful when the receiver is inserted;
Bluetooth Mode:
In Bluetooth mode (left + middle + right), the yellow light of the scroll wheel flashes rapidly for 3 seconds to enter the pairing state; Wired Mode: After plugging in the USB, it will enter wired mode and start charging the mouse;
Low Power Mode:
In wireless mode, when the battery voltage is below 3.4V, the red light of the scroll wheel is on and flashes at a flat rate of 0.5hz, indicating that the charging is below 3.2V-3.0, and it will automatically shut down. When the battery is low, the red light of the scroll wheel flashes. When charging, the scroll wheel is always red. When fully charged, the wheel light is solid green. After 5 seconds of constant light, it will return to the DPI lighting effect;
Sleep Mode:
After the mouse stops moving for 5 minutes, all backlights are turned off, and the mouse enters the first-level sleep state. After moving the mouse again to wake up the mouse, it enters the second-level sleep state for 15 minutes and needs to be awakened by pressing the button;
Power Saving Mode:
When using the wireless/Bluetooth mode, move the mouse to turn off the light strip. After the mouse stops moving, the light will recover in 1 second.

Light Switching Instructions

7 kinds of backlight mode switching: Bottom button switch, streamer (default)/spectrum/ breathing (colorful cyclic breathing)/steady on/horse race/reaction/off

Product Warranty

Warranty Card

http://weixin.qq.com/r/WnXF3XnEliTprT2_9yBI

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals