CTA PAD-PARAMULTI Triple Screen Adjustable Kiosk with Universal Security Enclosure Instruction Manual
- June 9, 2024
- CTA
Table of Contents
- CTA PAD-PARAMULTI Triple Screen Adjustable Kiosk with Universal Security
- INSTRUCTION – MANUAL
- INSTALLATION:
- 2. Adjusting Height
- 3. Setup Configuration
- 4. Setting up
- 5. Setting Up Foam Adapters
- 6. Setting Up Sheet Adapter
- 7. Setting Up Enclosure Openings
- 8. Enclosure Security
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CTA PAD-PARAMULTI Triple Screen Adjustable Kiosk with Universal Security
INSTRUCTION – MANUAL
INSTALLATION:
1. Setting up Base to Body
1A. Align base (B) to body (A) as shown. From below, rotate in (4) screws (G) and washers (H) as shown using provided tool (D) until securely tightened.
2. Adjusting Height
2A. Loosen the side bolt using provided tool (D) to raise or lower to height
to your preference.
Rotate opposite direction to securely tighten and set your height.
3. Setup Configuration
3A. Identify the top VESA plate, Tilt it down for a 2-direction setup or keep it up for a 1-direction setup as required.
4. Setting up
Tablet Enclosures
4A. Identify the (3) VESA locations. Align enclosures VESA holes (I) with the
body VESA holes (A). Then using the screw and hex nuts (E & F),screw in from
the front using provided tool (C) while holding the hex nuts from behind until
securely tightened. Repeat for all other
VESA locations with enclosures.
5. Setting Up Foam Adapters
6. Setting Up Sheet Adapter
7. Setting Up Enclosure Openings
8. Enclosure Security
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>