robustel EG5100 Industrial Edge Computing Gateway User Manual
- June 9, 2024
- robustel
Table of Contents
robustel EG5100 Industrial Edge Computing Gateway
Regulatory and Type Approval Information
Table 1: Toxic or Hazardous Substances or Elements with Defined
Concentration Limits
| Name of the Part | Hazardous Substances |
|---|---|
| (Pb) | (Hg) |
Metal
parts
| o| o| o| o| –| –| –| –| –| –
Circuit
modules
| o| o| o| o| o| o| o| o| o| o
Cables and cable assemblie
s
|
o
|
o
|
o
|
o
|
o
|
o
|
o
|
o
|
o
|
o
Plastic and polymeric
parts
|
o
|
o
|
o
|
o
|
o
|
o
|
o
|
o
|
o
|
o
o:
Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in RoHS2.0.
X:
Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials for this part might exceed the limit requirement in RoHS2.0.
-:
Indicates that it does not contain the toxic or hazardous substance.
Simplified EU Declaration of Conformity
We, Guangzhou Robustel Co., Ltd. are located at 501, Building #2, 63 Yongan
Road, Huangpu District, Guangzhou, China, declare that this radio equipment
complies with all applicable EU directives. The full text of the EU DoC is
available at the following internet address:
www.robustel.com/certifications/
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Radio Frequency Exposure Statement for IC
This device complies with IC exposure limits set forth for an uncontrolled
environment. This device shall be installed and operated with minimum distance
20cm between the radiator & body.
Related download link
Find more product documents or tools at:
www.robustel.com/en/documentations/
Technical Support
Tel: +86-20-82321505
Email: support@robustel.com
Web: www.robustel.com
Document History
Updates between document versions are cumulative. Therefore, the latest
document version contains all updates made to previous versions.
Date| Firmware Version| Document Version| Change
Description
---|---|---|---
July 6, 2022| 2.0.0| 1.0.0| Initial release.
Overview
EG5100 is a new generation of industrial edge computing gateway, supporting global 4G/3G/2G networks for cellular backhaul, with a fully-fledged Debian 11(bullseye) based operating system able to support thousands of existing or new ARMv7 (Raspberry Pi compatible) based applications.
Package Checklist
Before commencing installation ensure your package has the following components:
Panel Layout(May vary on different models)
Interface Descriptions
-
Serial Ports. Two software configurable serial 1. Serial Ports. Two software configurable serial
-
Ethernet Ports. Two Ethernet ports, both of them could be configured as WAN or LAN.
-
Reset Button.
-
Digital Input and Output Ports. Two sets of digital inputs and two sets of digital outputs. Some applications for reference are as below:
Note: The external power supply DC voltage range is 5V~30V, 0.1A max. -
LED Indicators.
Note: The USR LED’s color is green.
Hardware Installation
- SIM Card Installation. Remove the SIM card cover to insert the SIM cards into the device, then screw up the cover.
- Antenna Installation. Rotate the antenna into the antenna connector accordingly.
- Terminal Block Installation. Insert the 6PIN and 8PIN terminal blocks into the interfaces connector, then can connect the devices or sensors to the gateway with wires via corresponding interfaces e.g. RS232/RS485, DIDO…
- Power Supply installation. Insert the power supply cord into the corresponding terminal block if needed, then insert the terminal block into the power connector.
- DIN Rail Mounting. Use 2 M3 screws to fix the DIN rail to the device, then hang the DIN rail on the mounting bracket.
- Grounding the Device. Grounding will help to prevent the noise effect due to electromagnetic interference (EMI). Connect the device to the site ground wire by the grounding screw before powering on.
Login to the Device
- Connect the gateway’s Ethernet port to a PC with a standard Ethernet cable.
- Before logging in, manually configure the PC with a static IP address on the same subnet as the gateway address, click and configure “Use the following IP address”.
- To enter the gateway’s web interface, type http://192.168.0.1 into the URL field of your Internet browser.
- Use login information shown in the product label when prompted for authentication.
- After logging in, the home page of the web interface is displayed, then you can view system information and perform configuration on the device.
- The automatic APN selection is ON by default, if need to specify your own APN, please go to the menu Interface->Cellular->Advanced Cellular Setting->General Settings to finish the specific setting.
- For more configuration details please refer to.
RT104_SM_RobustOS Pro Software Manual.(END)
CONTACT
- Support: support@robustel.com
- Website: www.robustel.com
©2022 Guangzhou Robustel Co., Ltd. All rights reserved. Subject to change without notice.
References
- 4G/LTE/5G/Cellular Routers, Gateways and Modems for Industrial IoT - Robustel
- 4G/LTE/5G/Cellular Routers, Gateways and Modems for Industrial IoT - Robustel
- Certifications | Robustel - Industry-leading IoT Solutions Provide