REELCRAFT A5800 OLP Series 5000 Spring Driven Hose Reels Instruction Manual
- June 9, 2024
- REELCRAFT
Table of Contents
REELCRAFT A5800 OLP Series 5000 Spring Driven Hose Reels
Dimensions
| A| 14 3/8”
---|---|---
B| 14”
C| 9 3/4”
D| 2 1/2”
E| 6 1/8”
SAFETY
INSTALLATION: A flexible hose connection must be used between the hose
reel inlet and the source of supply to prevent possible misalignment and
binding.
MOUNTING: The hose reel is equipped with a universal mounting bracket so
that it can be mounted on the floor, wall or ceiling; whichever place is
convenient. The hose guide arm can be moved to the position desired by
removing the screws fastening the guide bracket to the reel base. Shift the
guide arm bracket so the hose comes off the reel at the desired position and
replace the screws. NOTE: For proper installation in wall mount applications,
ensure reel is mounted with inlet on the right as you are facing the reel.
Failing to do so could cause latching issues.
LUBRICATION: Hose reel spring and bearings are factory lubricated and
require no further lubrication.
REPLACING HOSE:
- Wind spool flange clockwise-facing swivel-until spring is tight.
- Back off three turns and latch.
- Insert hose through roller guide.
- Connect hose fitting to swivel joint and secure hose with clamps.
ADJUSTMENTS: To adjust spring tension, add or remove wraps of hose from
the spool, one wrap at a time until desired tension is obtained.
REPAIRS: Extensive repairs should be performed only by an authorized
serviceman or factory to avoid damage which may void your warranty. Remove all
spring tension before beginning disassembly process.
Overview
Item #
| Part #| # Req.| Description
---|---|---|---
1| 300031| 2|
1” Snap Ring
2
| 300034| 2| Spacing Washer
3| S295-102| 3|
1/4-10 Hex Head Screw
4
| 260022| 1|
Flange Sheave
5| 500006| 1|
Sheave Disk
6
| S500019| 1| Latch Cam
7| S260648| 1|
Spring Arbor
8
| 300002| 7| 10-32 x 1/2” Mach. Screw
11| S500107| 1|
Guide Arm & Roller Assembly
12
| 500101| 1| Base Assembly
14| S505740| 1|
Drive Spring Assembly
15
| S261360| 1| Spring Case Stud
16| 300006| 1|
3/8-16 x 1/2” Set Screw
17
| S500103| 1|
Spring Case & Hub Assembly
18| S82-15| 8|
10-32 x 3/8” Nyloc Nut
19
| S400021| 1| Latch Bumper
20| S32-136| 1|
10-24 x 3/8” Self Tap Screw
21
| S400012| 1| Latch Bushing
22| S400018| 1|
Latch Spring
24
| 400020| 1| O-ring
25| S400109| 1|
Latch Plate Assembly
26
| 300035| 1| 10-32 x 1” Mach. Screw
27| 3-117440| 1|
U-bolt Hose Clamp
28
| 261650-1| 2| 1/4-20 Zinc Nyloc Nut
30| 602305| 1|
Main Shaft & Snap Ring Assembly
Item #
| Description| # Req.| A5800 OLP| A5825 OLP| A5800 OMP| A5825 OMP
---|---|---|---|---|---|---
9| Bumper Stop Assembly| 1| None| 2-HR1004-3| None|
2-HR1004-3
10
| Hose Assembly| 1| None| 601020-25| None| 21-260043
31| Swivel Union| 1| S257-26| S257-26| 260749|
260749
32
| Swivel Union| 1| 300010| 300010| S257-26| S257-26
33| Swivel Assembly| 1| S600915-1| S600915-1| S600172|
S600172
Hose I.D. and Length
| None| 1/2” x 20’| 1/2” x 25’| 1/2” x 30’
Reel Inlet Connection| 3/8” F.P.T.| 3/8” F.P.T.| 3/8” F.P.T.|
3/8” F.P.T.
Max. Operating Pressure
| 500 P.S.I.| 300 P.S.I.| 3250 P.S.I.| 3250 P.S.I.
Max. Operating Temperature| 210 °F| 150 °F| 210 °F|
210 °F
Customer Support
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN
46725
Ph:800-444-3134 /
260-248-8188 • Fax:
800-444-4587 /
260-248-2605
Customer Service:855-634-9109 •
[email protected] •
www.reelcraft.com