FANATEC P1 V2 CSL Steering Wheel User Guide

June 9, 2024
FANATEC

FANATEC P1 V2 CSL Steering Wheel

FANATEC-P1-V2-CSL-Steering-Wheel-img- \(2\)

PACKAGE CONTENT

FANATEC-P1-V2-CSL-Steering-Wheel-img-
\(7\)

STEERING WHEEL ATTACHMENT

FANATEC-P1-V2-CSL-Steering-Wheel-img-
\(8\)

CENTRE CALIBRATION

FANATEC-P1-V2-CSL-Steering-Wheel-img-
\(9\)

SHIFTER CALIBRATION

FANATEC-P1-V2-CSL-Steering-Wheel-img-
\(10\)

MODES

FANATEC-P1-V2-CSL-Steering-Wheel-img- \(11\)

TUNING OPTIONS

FANATEC-P1-V2-CSL-Steering-Wheel-img-
\(12\)

BUTTON INSERTS

FANATEC-P1-V2-CSL-Steering-Wheel-img-
\(13\)

QUICK RELEASE ATTACHMENTFANATEC-P1-V2-CSL-Steering-Wheel-img-
\(14\)

BUTTON MAPPINGFANATEC-P1-V2-CSL-Steering-Wheel-img-
\(15\)

SUPPORT

FANATEC-P1-V2-CSL-Steering-Wheel-img-
\(16\)

The product warranty is provided by Endor AG. Refer to the included warranty sheet as well as the terms & conditions of Endor AG on fanatec.com.

FANATEC-P1-V2-CSL-Steering-Wheel-img- \(6\)

FCC

This device complies with part 15 of the FCC rules. The operation of this device is subject to the following two conditions:

  • This device may not cause harmful interference, and must accept any interference received, including interference that may cause undesired operation.
  • This device was not modified differently than described explicitly in this user manual.

NOTE : This device was tested and approved to the limitations for class B of digital devices according to part 15 of the FCC rules. This limitation should ensure an adequate protection against harmful interferences in residential areas. However, a warranty for the nonrecurring of interferences is not assumed.
Do not modify the device differently than explicitly described in the product- related user manual. Nevertheless, if you do modify the device differently than explicitly described in the product-related manual, you can be determined to stop the operation of the device

Imported and distributed by Endor America LLC
8200 Wilshire Blvd. Suite 200 – Beverly Hills CA 90211 – USA
US/CAN: +1 321-655-3524
Email : info.webshop@fanatec.com
Website : www.fanatec.comwww.endor.ag

China RoHS 2 refers to the Ministry of Industry and Information Technology Order No. 32, effective July 1, 2016, titled Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products. To comply with China RoHS 2, we determined this product’s Environmental Protection Use Period (EPUP) to be 10 years in accordance with the Marking for the Restricted Use of Hazardous Substances in Electronic and Electrical Products, SJT 11364-2014

Part Name

|

Hazardous Substances

---|---

(Pb)

|

(Hg)

| (Cd)|

(Cr6+)

|

(PBB)

|

(PBDE)

(Cable/Adaptor)

| O| O| O| O| O| O

(Plastic)

| O| O| O| O| O| O

(Metal parts)

| X| O| O| O| O| O

(Other enclosure components)

| O| O| O| O| O| O

(PCBA)

| O| O| O| O| O| O
This table is prepared in accordance with the provisions of SJ/T 11364-2014

O: Indicates that the hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T 26572.

X : Indicates that the hazardous substance contained in at least one of the homogeneous materials used for

this part is above the limit requirement of GB/T 26572.

Fanatec® is a registered trademark of Endor AG Designed and developed by Endor AG in Germany E.ON-Allee 3 – 84036 Landshut – Germany
EU: 00800 0 FANATEC or +49 (871) 9221 -122
US/CANADA : 011 800 0 FANATEC or +49 (871) 9221 -122
AUSTRALIA: 00800 0 FANATEC or +49 (871) 9221 -122
JAPAN : +81 306 7172 -719
Email: info.webshop@fanatec.com
Website : www.fanatec.comwww.endor.ag
Made in China

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals