FANATEC ClubSport Shifter Carbon Knobs Kit User Guide
- June 6, 2024
- FANATEC
Table of Contents
ClubSport
Shifter Carbon Knobs Kit
Quick Guide
CONTENTS
- 1x Carbon H-Pattern Shifter Knob
A - 1x Carbon Sequential Shifter Knob
**B** - 1x Quick Guide
SPECIFICATIONS
- Matte carbon gear knobs
- Added weight with metal cores
- H-Pattern knob: 220 g
- SQ knob: 141 g
- Meets the automotive standard (M12x1.5)
COMPATIBILITY
The Carbon Shifter Knobs are compatible with the following Fanatec shifters:
- ClubSport Shifter
- ClubSport Shifter V1.5
- ClubSport Shifter SQ
- ClubSport Shifter SQ V1.5
- ClubSport Shifter SQ V1.5 Limited Edition 2019
NOTE: Do not attempt mounting the shifter knobs onto third-party shifter shafts.
NOTE: Use a clean, moist cloth for cleaning the knobs. Only use water without any chemical additives.
NOTE: Do not overtighten the knobs. Tighten only by hand. Do not apply thread-locking fluid.
MOUNT & UNMOUNT
-
To mount the selected Carbon Shifter Knob, carefully place the knob onto the shifter shaft and turn in a clockwise direction until firmly locked against the threading of the shifter shaft.
-
To unmount the selected Carbon Shifter Knob, turn in a counterclockwise direction until the knob is completely free from the shaft threading.
|
ENDOR products comply with t the E European U union Directive 2011/65/EU and
its amendments, including exemptions for the use of lead such as high-
temperature solder. ENDOR is working to phase out the use of these exempted
substances where technically possible.
---|---
| ENDOR AG hereby declares that all parts used in the manufacturing of
Fanatec® products fully comply with the related requirements of the European
Union regulation (EC) 1907/2006 concerning the Registration, Evaluation,
Authorisation and Restriction of Chemicals (REACH).
Manufactured by
Fanatec® is a registered trademark of Endor AG Designed and developed by Endor
AG in Germany E.On Allee 3 – 84036 Landshut – Germany
Telephone: +49 (871) 9221-122 Fax: +49 (871) 9221-221
Email: [email protected]
Website: www.fanatec.com –
www.endor.ag
Made in China