oticon AudigyFit 2 AGXO E Series Hearing Aid Fitting Software User Guide
- June 9, 2024
- oticon
Table of Contents
AudigyFit 2 | 2023.1 fitting and new feature guide
Navigation Bar and Welcome Screen
To navigate through the AudigyFit 2 software, follow the navigation bar at the
top of the screen, working from left to right. This bar also contains the Save
and Exit button, Connect button with selected programmer, information
about the hearing aid and notification icon .
The Welcome screen allows for connecting to instruments or simulating a
fitting.
With AudigyFit 2 | 2023.1, a new and improved detection/ connection flow
provides all relevant information in the detection dialog box, allowing for
transparent and intuitive connection of hearing aids to the software.
Selection Screen
Different Families, Styles, and Features may be selected while running a
simulation. The ability to view the fitting level for miniRITE and custom
instruments is located in the middle of the screen. Additionally, AGXO E
Series is now available to select and fit in AudigyFit 2 | 2023.1.
The bars beside the hearing aid(s) will become green once connected.
Selection Screen — Acoustics
Clicking on the left task pane option labeled Acoustics allows for the opportunity to change the selected earpiece. Please note, if an earpiece is changed, be sure to re-prescribe settings at the bottom of the screen.
Fitting Screen
The fitting tools in the left task pane make key fitting features easily
accessible and convenient. Real time adjustment of gain, adaptation manager
and compression
can be made in the Fine-tuning option.
To increase the clarity and ease of the fitting process when fitting Polaris
R™ or Polaris™ instruments, the latest AudigyFit 2 now has alignment of
trimmer grid values and insertion gain graph values. This is visible in
insertion gain graph view when using ANSI s3.5 (ICRA stationary) input signal.
Fitting Screen — AGXO E Series features: SuddenSound Stabilizer and Wind & Handling Stabilizer
SuddenSound Stabilizer is a new feature for AGXO E Series instruments that
effectively addresses sudden sounds, while preserving speech intelligibility.
This feature can be found in the Fine-tuning screen, under the SuddenSound
Stabilizer tab, where clinicians can select the appropriate setting for sudden
sounds, ranging from OFF to Max.
AGXO E Series also has Wind & Handling Stabilizer, which helps clean up the
input by detecting then reducing noise caused by wind or handling. This
feature can be found in the Fitting step, under Automatics. It is recommended
to leave this feature on.
Fitting Screen — AGXO E Series Environments tool
The Environments tool is a new feature in the Data Logging section in the
software. The data displayed shows the amount of time spent in each type of
environment (Simple, Moderate and Complex) from one fitting to the next.
Fitting
Screen — AGXO E Series Conversation Activity tool
The Conversation Activity tool is a new tool designed to help get a better
understanding of how a patient is engaging in different kinds of sound
environments. This feature is located in the Data Logging section and shows
conversation activity per environment and per usage period.
End Fitting Screen
The low battery warning indicator for AGXO E Series, has the option to choose
Voice notifications as an alternative to the tonal notifications, for the low
battery indicator. The choice between spoken and tonal indicators is
configurable in the fitting software.
The End Fitting screen also allows access to Current Battery Level and Battery
Health for rechargeable hearing aids. Click Save and Exit to save the session
and exit the software.
agxhearing.com
oticon.com
22-424534 15555-0048/01.23
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>