STEGO CSF 028 TouchSafe 250W Fan Assisted Panel Heater User Guide
- June 4, 2024
- STEGO
Table of Contents
STEGO CSF 028 TouchSafe 250W Fan Assisted Panel Heater
USAGE
Heating units are used to prevent the development of condensation and drops
in temperature in control cabinets. The heaters must only be used in
stationary, sealed housings for electrical devices. Heating units without an
integrated thermostat should be connected in series to a suitable thermostat
for temperature control. Heating units must not be used for the heating of
rooms.
Safety considerations
- Installation must only be performed by qualified electrical technicians in observation of the respective national power-supply guidelines (IEC 60364).
- The safety measures according to VDE 0100 are to be ensured.
- The technical specifications on the type plate must be strictly observed!
- The user of the heater must ensure through an installation that components that are mounted above the air outlet grating are not damaged by the hot outlet air.
- The device must be connected to mains via an all-pole disconnecting device (with contact gap of at least 3 mm in the switched-off state).
- The device must not be operated in environments with aggressive atmospheres.
- The device is to be installed vertically (air blow direction upwards) or horizontally (air blow direction to the side).
- No changes or modifications must be made to the device.
- In the event of any damage to or malfunction of the heating unit, the device must not be repaired or put into operation (dispose of the heating unit).
- Dismantle the heater only after it has cooled down.
Attention! The heater must not be mounted on flammable materials (e.g. wood, plastic etc.).
Attention! The heater must always be operated together with the fan! DANGER OF OVERHEATING!
Notice The manufacturer accepts no liability in the case of failure to observe this brief instruction, improper use and changes or damage to the device.
OVERVIEW
SPECIFICATIONS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>