JK Audio Guest Module 1 Remote Keypad for Digital Hybrids User Guide
- June 5, 2024
- JK Audio
Table of Contents
Guest Module 1™
Remote Keypad
User Guide
Welcome
Thank You
Thank you for purchasing the JK Audio Guest Module 1 Remote Keypad. Please
read this guide for instructions on setting up and using your new product.
Getting Assistance
If you have technical or application questions:
In the US & Canada, call us toll-free at:
800-552-8346
For all other countries dial:
815-786-2929
(M-F 8:30-5:00 pm Central Time Zone)
Email us at: [email protected] Or, and check
out our FAQ section for answers to common questions.
Limited Warranty
Guest Module 1 is covered by a 1-year warranty to be free from defective
workmanship and materials. To obtain service, contact JK Audio by phone or
email for return authorization. Once authorized, you will carefully pack and
ship the faulty product and all accessories to us. You will pay for shipping
to us and we will pay for the return back to you.
This warranty does not cover damages due to accident, weather, fire, flood,
earthquake, misuse, unauthorized repairs or modifications, or damages that
occurred in shipping, only defective workmanship or materials. There are no
expressed or implied warranties that extend beyond the warranty here made.
Features
Compatible with Broadcast Host,
innkeeper LTD, and innkeeper 1x/1rx| Call Button
---|---
DTMF keypad|
Keypad disable switch|
Overview
Introducing the Guest Module 1
Guest Module 1 gives you remote access to the on-hook / off-hook and dial
features of the Innkeeper 1, 1r, 1x,1rx, or Broadcast Host digital hybrids.
This little time-saver gives you call control you simply can not get with an
auxiliary telephone and a couple of switches. An 8-pin RJ45 modular cable
provides remote power so there is no need for batteries or an external power
pack. The Call button will flicker when a call comes in. Press this button to
answer or place a call. The button will stay lit when a call is present. When
you dial on air, the tones go out on the line and do not come back mixed with
the dial tone or caller signal.
Using Guest Module 1
Getting Connected
Connect Guest Module 1 to your JK Audio digital hybrid using an 8-pin RJ45
modular cable. This cable provides remote power so there is no need for
batteries or an external
power pack. We have provided a 25-foot cable to cover most installations. If
you need a custom-length cable, be sure to purchase a cable wired so that the
wire on pin 1 of each connector is the same color (pin 1 = pin 1). Data cables
are usually wired from pin 1 to pin 1, but telephone cables are usually wired
from pin 1 to pin 8.
Operating
The Call button will flicker when a call comes in. Press this button to answer
or place a call. The button will stay lit when a call is present. When you
dial on-air, the tones go out on the line and do not come back mixed with the
dial tone or caller signal. Guest Module 1 was designed exclusively for JK
Audio Digital Hybrids.
Technical Information
RJ-45 Modular Pinout:
Pin Description
- Ground
- Call / Drop Control
- Ring / OH LED
- DTMF Output
- +5 VDC
- Reserved
- Reserved
- Reserved
Specifications
Dimensions
| Size | 4.75″ x 3.4″ x 2″ (12 x 8.6 x 5 cm) |
|---|---|
| Weight | 11 oz (300 g) |
Maximum cable length 50 feet.
Guest Module 1™
Remote Keypad
User Guide Version 4/16/22
JK Audio, Inc.
1311 E 6th St. Sandwich, IL 60548
United States
Telephone: 815.786.2929
Toll-Free: 1.800.jk audio
Fax: 815.786.8502
www.jkaudio.com
© 2022 JK Audio, Inc. All rights reserved.