tp-link TL-POE170S PoE Injector Installation Guide
- June 9, 2024
- tp-link
Table of Contents
Installation Guide
PoE Injector
LED Explanation
PWR
On: Power on
off: Power off
PoE (Only for TL-POE170S)
On: Normal power supply
off: No powered device connected
Flashing: Abnormal power supply
Note:
For simplicity, we will take TL-POE160S for example in this Guide.
Connection
Note:
- The PoE Injector supplies steady power and data connectivity to a powered device such as PoE IP Camera, PoE AP and PoE IP Phone through an Ethernet cable.
- For TL-POE170S, plug the product into the wall outlets with earthing connection through the power supply cord.
Specifications
General Specifications
Standards| IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at
IEEE 802.3bt (Only for TL-P0E1703)
---|---
LED| TL-P0E160S: PWR TL-P0E170S: PWR, PoE
Cable Type| UTP/STP of Cat. 5 or above (based on the standards that the
connected devices comply with)
Ports| 10/100/1000 Mbps RJ45 DATA IN Port
10/100/1000 Mbps RJ45 PWR+DATA OUT Port AC 100-240 V 50/60 Hz Power Input Port
Maximum Power Supply| TL-P0E160S: 30 W
TL-P0E170S: 60 W
Dimensions (LXWXH)| TL-P0E160S: 125×59.4×36.8 mm TL-P0E170S: 154.7x70x42 mm
Wall Mountable| Yes
Distance Between Mounting Holes| TL-P0E170S: 102 mm
Environmental and Physical Specifications
Operating Temperature| TL-POE 160S: 0°C to 40°C (32°F to 104°F)
TL-POE 170S: 0°C to 45°C (32°F to 113°F)
---|---
Storage Temperature| -40°C to 70°C (-40° F to 158 ° F)
Operating Humidity| 10% to 90% RH non-condensing
Storage Humidity| 5% to 90% RH non-condensing
Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need
service, please contact us.
The plug on the power supply cord is used as the disconnect device, the
socket-outlet shall be easily accessible.
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper use
of the device. Please use this product with care and operate at your own risk.
FAQ
Ql. Can the PoE injector supply power to a PoE device which doesn’t have a
gigabit PoE port?
– A: Yes. All RJ45 ports of the PoE injector support 10/100/1000 Mbps.
Q2. What can I do if my PoE injector doesn’t supply power to the powered
device or the supplied power is unstable?
– Al: Ensure the PD is PoE-compliant and its connecting port supports the PoE
function.
– A2: Ensure the power consumption of the PD doesn’t exceed the maximum power
supply of the PoE injector, otherwise the overload protection of the PoE
injector will be activated. The quality and length of the Ethernet cable may
influence the reception of the power supply.
To ask questions, find answers, and communicate with TP-Link users or
engineers, please visit https://community.tp-link.com to join TP-Link
Community.
For technical support and other information, please visit https://www.tp-
link.com/support, or simply scan the QR code.
If you have any suggestions or needs on the product guides, welcome to email
techwriter@tp-link.com.cn.
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU
declaration of conformity may be found at https://www.tp-
link.com/en/support/ce.
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Electromagnetic
Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations
2016.
The original UK Declaration of Conformity may be found at https://www.tp-
link.com/support/ukca
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>