ZALMAN Z10 ATX MID Tower Computer Case

Precautions

• Read this manual carefully before installing.
• Check the product and components before installing. If you find any abnormality, contact the location where you purchased the product for a replacement or refund.
• Wear gloves to prevent accidents when installing the product.
• Severe damage may occur when mounting the system, so do not apply excessive force.
• Connecting the cable incorrectly may cause a fire due to a short circuit. Make sure to refer to the manual when connecting the cable.
• Be careful not to block the ventilation hole of the product when using the system.
• Avoid locations with direct sunlight, water, moisture, oil, and excessive dust. Store and use the product in a well-ventilated location.
• Do not wipe the surface of the product using chemicals. (organic solvents such as alcohol or acetone)
• Do not insert your hand or other object into the product during operation, as this may injure your hand or damage the object.
• Store and use the product out of children’s reach.
• Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
• The exterior design and specifications of the product are subject to change without prior notice to consumers for quality improvement.

Specifications

Fan Support

| Top| 3 x 120mm, 2 x 140mm
Front| 3 x 120mm, 3 x140mm
Rear| 1 x 120mm
Bottom| 2 x 120mm
Side| 2 x 120mm
Fan(s) Included| Front| 3 x 140mm Black Fan| 3 x 140mm ARGB Fan| 3 x Infinity LED
Rear| 1 x 120mm Black Fan| 1 x 120mm ARGB Fan| 1 x Infinity LED

Radiator Support

| Top| 120mm / 140mm / 240mm / 280mm / 360mm
Front| 120mm / 140mm / 240mm / 280mm / 360mm
Rear| 120mm
Dust Filter| Top| Magnetic PVC
Bottom| Slide PVC (With Frame)
I/O Ports| 2 x USB3.0, 1 x USB Type-C, HD AUDIO, MIC, PWR,

Reset, LED Button

Accessories component

I/O Ports

| Part| #| Part| #| Part| #| Part

---|---|---|---|---|---|---|---
ⓐ| Power Button| ⓑ| Reset Button| ⓒ| HDD / Power LED| ⓓ| Headphone Jack
ⓔ| Microphone Jack| ⓕ| USB 3.0 Ports| ⓖ| Type-C| ⓗ| Led Button

1. Removing the side panels

2. Removing the front panel

   • Removing the front dust filter
   • Front Bezel

3. Mounting the motherboard

   • Motherboard size
   • ATX
   • mATX
   • Mini-ITX

4. Mounting PCI-E(VGA) card

5. Mounting the 2.5″ SSD

6. Mounting the 3.5″ and 2.5″ SSD / HDD

7. Mounting the PSU

8. Mounting the radiator

9. Mounting the front radiator

  * 120mm / 140mm / 240mm / 280mm / 360mm
2.  **Mounting the front radiator**
  * 120mm / 140mm / 240mm / 280mm / 360mm
3. Mounting the rear radiator
  * 120mm![ZALMAN-Z10-ATX-MID-Tower-Computer-Case-FIG-14](https://manuals.plus/wp-content/uploads/2023/03/ZALMAN-Z10-ATX-MID-Tower-Computer-Case-FIG-14.png)

9. Mounting the fans
10. Mounting the front fans

  * 3 x 120mm, 3 x 140mm
2. Mounting the top fans
  * 2 x 120mm, 2 x 140mm
3. Mounting the rear/bottom/ side fan
  * 1 x 120mm / 2 x 120mm / 2 x 120mm![ZALMAN-Z10-ATX-MID-Tower-Computer-Case-FIG-15](https://manuals.plus/wp-content/uploads/2023/03/ZALMAN-Z10-ATX-MID-Tower-Computer-Case-FIG-15.png)

Fan(s) Included / Fan Specifications

I/O Connectors

Certification

• This mark, designed by Zalman, indicates product compliance with the European Union’s RoHS (Restriction of Hazardous Substances) Directive.

• Disposal of Old Electrical& Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

• Zalman Tech Co., Ltd.
  

• #2612, Obiztower, 126, Beolmal-ro, Dongan-gu, Anyang-si, Gyeonggi-do,14057, Korea

• www.zalman.com

Documents / Resources

| ZALMAN Z10 ATX MID Tower Computer Case [pdf] User Manual
Z10, Z10 PLUS, Z10 DUO, Z10 ATX MID Tower Computer Case, ATX MID Tower Computer Case, MID Tower Computer Case, Tower Computer Case, Computer Case
---|---

References

• zalman.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>