AeroGrow AGST050 Stem Grow Light User Guide
- June 9, 2024
- AeroGrow
Table of Contents
AeroGrow AGST050 Stem Grow Light
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
When using the AeroGarden Grow Light, basic precautions should always be
followed. Read all instructions before using your AeroGarden• product.
DANGER! – To reduce the risk of electrlc shock:
-
The Grow Light has a specific plug. Do not change or modify the plug in any way
-
Always unplug the Grow Light from electrical outlet before cleaning
WARNING! – to reduce risk of burns, fire, electric shock, or injury to persons: -
Unplug the Grow Light from outlet before putting on or taking off parts
-
Please take proper precautions when operating a Grow Light near or by individuals requiring close supervision, including children
-
Use the Grow Light only for its intended use as described in its instructions
-
Never operate the Grow Light if it has a damaged cord or plug, if it’s not working properly, if it has been dropped and damaged, or if it has been dropped in water. If any of these conditions occur, contact www.AeroGarden5upport.com or your country’s local distributor for instructions
-
Keep cord away from heated surfaces
-
Never operate furnishing with air openings blocked. Keep air openings free of lint, hair, and the like
-
Never drop or insert any object into any electrical openings
-
Do not use outdoors
-
Do not operate where aerosol (spray) products are being used or where oxygen is being administered
-
Do not touch moving parts, or hot parts, such as lights, reflective surfaces, and the like
-
To disconnect, remove plug from outlet
-
Do not place or submerge base, cord, plug, or light hood in water or other liquid to clean it
-
Do not allow water to contact hot LED Grow Light
-
Use only approved and supplied parts and accessories. Use of any other kind of accessory is not recommended.
-
Do not use the Grow Light for other than its intended purpose
-
This product is intended for household and residential use only. This product is not approved for commercial applications
-
If supply cord is damaged, it must be replaced by manufacturer, its service agent, or similarly qualified technician in order to avoid hazard
-
Electrical wiring must be in accordance with local regulations
-
This appliance is not intended for use by persons (including children) with reduce physical. sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance by a person responsible for their safety
-
Children should be supervised to ensure that they do not play with the appliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority
to operate the equipment. Note: This equipment has been tested and found to
comply with the limits for a Class B digital device pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and if
not installed and used in accordance with the instructions, may
cause handful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. To
maintain compliance with FCC’s RF exposure guidelines, this
equipment should be installed and operated with a minimum distance of 20cm
between the radiator and your body.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device
LIMITED WARANTY
WHAT IS COVERED
This warranty covers any defects in materials or workmanship, with the
exceptions stated below.
HOW IDNG COVERAGE lASIS
This warranty runs for one 0) year on the AeroGarden LED Grow Light from the
date of original purchase, for the original purchaser/user.
WHAT IS NOT COVERED
The warranty shall not apply to problems arising from: normal wear; failure to
adhere to enclosed operating instructions; serial numbered products if the
serial number has been removed or defaced; products subject to negligence,
accident, improper use, maintenance or storage; products damaged by
circumstances beyond AeroGrow International Inc.~ control; loss or damage to
removable parts; or products modified (including, but not limited to,
modifications through the use of unauthorized parts or attachments) or
repaired by anyone other than AeroGrow International, Inc., or its designee.
This warranty excludes all incidental or consequential damages.
WHAT AEROGROW Will DO
AeroGrow International, Inc., at its option, will repair any defect in
materials or worf«nanship or will replace this product with ones of similar
features and price. AeroGrow International, lnc.’s sole obligation and vour
exclusive remedy under this warranty shall be limited to such repair or
replacement.
TO RETURN THIS PRODUCT
For any questions or concerns, or for more information, visit our website at
www.aerogarden.com. Our customer service
representatives are available via Live Chat and Email. Please do not return
any product without contacting AeroGrow for return authorization. Unauthorized
returns, as well as C.O.D. shipments, will be refused. For more infonmation
regarding returns, please see the Returns section at
www.AeroGarden.com
Due to continuing improvements, actual product may differ slightly from the
product described herein. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to vou. This warranty gives you specific legal rights,
and you may have other legal rights that vary from state to state.
AeroGrow International, Inc., P.O. Box 18450, Boulder, CO 80308-1450
©2022 AeroGrow International, Inc.
www.aerogarden.com AGST0501/02
DesignedinBoulder,CO.Madeln(hina.
Electrical Ratings:
Adapter Input: 100-240VAC, 50/60Hz
Adapter Output: SVDC, 2A
Grow Light Input: SVDC, 1.2A
Assembly Instructions
-
Insert leaf-shaped prongs into the bottom of the post. They provide stability for your grow light.
-
Connect the post to the LED light hood and push it in until it clicks.
-
Connect the power cord to the hood and the power adapter.
-
Insert your grow light in the soil of your plant’s pot using the leaf-shaped prongs. If needed, increase the height by extending the post.
Note: Do not pull by the LED light hood. We recommend 3.5″ of space in between the LED light hood and the top of your plant. -
Plug in your grow light to start the 10-hour Light ON cycle.
-
The AeroGarden leaf logo on the top of the LED light hood will manually turn on/dim/off your light. For more custom features (light modes, custom light schedule, and more), download the AeroGarden app on Apple or Google Play App Stores.
Tips and Tricks
- Use the post clip to keep your power cord tidy.
- Gently tilt the LED light hood up/down to adjust to your plant’s shape.
- For best results, maintain about 3.5″ of space between the LED light hood and the top of your plant.
- To reset the light ON cycle, unplug and plug back in your grow light at desired start time.
- AeroGarden Grow Lights provide customization for your plants. Experiment with light cycles, light modes, and dimming levels that work for you and your plants.
- Turn off or dim your grow lights at any time. They’ll come on again at their next scheduled ON time.
What’s Included
- LED light hood
- Leaf-shaped prongs
- Power adapter
- Power cord
- (2) Plastic post clips
Unlock Additional Settings
Through the AeroGarden App:
- Easy on/off
- Customizable 0-100% light dimming
- Customizable on/off light schedule, including adjustable length of time
- Customizable sunrise/sunset setting that provides a gentle dimming of your grow light to simulate sunrise and sunset
- 4 light modes to choose from: full spectrum, white, warm, and cool. Full Spectrum mode is the recom mended default and provides optimal plant health.
Additional light modes offer more color customizations and provide light for increased plant health.
Good to Know
- Connect your grow light to the AeroGarden app (found on Apple or Google Play app stores) to unlock additional features.
- Your grow light will start its Light ON cycle the moment it is plugged in.
- Preset light cycle is 10 hours ON and 14 hours OFF in a 24 hour cycle, turning on at the same time every day. More customization in the app.
- Your grow light’s post is about 12.5 inches long when fully extended.
- To avoid damage, do not collapse or extend your post by pulling or pushing by the LED hood.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>