YEELIGHT Staria Bedside Lamp Pro User Manual

Table of Contents

YEELIGHT-Staria-Bedside-Lamp-Pro-PRODUCT

Plug the adaptor connector into the DC terminals, then connect the power.

ON/OFF button
Shortly tap ON/OFF button to turn on or turn off the product.
When the light is on, long tap the ON/OFF button to adjust the color temperature and brightness.

  * More personalized settings are available in Yeelight APP.
3. When the light ís on, tap the ON/OFF button twice to activate Timer mode.

More features
- Night mode
Set your own night mod e in the app. The lamp will turn on automatically with cozy nightlight during the preset night mode period. If not in the preset period, the lamp will return to the default state saved in the APP.
- The Night Mode is off by default. Please activate it in Yeelight APP
Wireless charging
- The wireless charging indicator will flash 3 times when the lamp is connected to the power supply with its original adaptor.
- Put the mobile phone in the wireless charging area. The mobile phone is charging when yellow indicator light is on. If not , please adjust the phone to proper position.
- When the phone is fully charged, the yellow indicator light is off

Open the Home APP in your iPhone or iPad.
Tap “Add Accessories” and follow the instructions in the app to scan the QR code in the user manual or on the product base, or enter the 8-digit setup code above the QR code to grant the Apple Home app access.

Make sure the Wi-Fi network is available and you can get access to the internet normally. This product is not compatible with 5G network.
To ensure proper Homekit compatibility, it is recommended to use iOS 9 or above;
HomeKit codes are indicated under the base of lamp. Please be noted that HomekKit codes are required for reset every time.
Apple is the trade mark of Apple LLC.

Tap and hold the ON/OFF button, and re-insert the adaptor connector into the DC termnial till the light is breathing, and then release the ON/OFF button.
Please reset the lamp before using it in a new network environment

YEELIGHT-Staria-Bedside-Lamp-Pro-
FIG-5

Warnings

Check the voltage before using the product. Improper voltage may damage the product and cause potential safety hazards.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
The light will produce heat during operation. Please keep proper ventilation.
Using adapters other than the original one may cause product damage or safety hazards.
Do not tilt the lamp but place it smoothly.
Do not put battery or battery products near the wireless charging area in case of any potential safety hazard.
For household use only.
Class l Luminaire.
All the pictures shown in this manual are for reference only.

Hereby, Qingdao Yeelink Information Technology Co., Ltd., declares that the radio equipment type YLCT03YL is in compliance with Directive 2014/53/EU.

WEEE Disposal and Recycling Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste.
Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities.
Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
Learn more atwww.yeelight.com
Customer service:support@yeelight.com
Manufactured by: Qingdao Yeelink Information Technology Co., Ltd.
Address: F10-B4, Building B, Qingdao International Innovation Park, No. 1 Keyuan Weiyi Road, Laoshan
District, Qingdao City, 266101, Shandong Province, China