YEELIGHT W3 Multicolor Smart LED Bulb User Manual
- June 9, 2024
- Yeelight
Table of Contents
YEELIGHT W3 Multicolor Smart LED Bulb
Installation and Steps
Install the bulb
Install the bulb and turn on the power.
Notes:
- Make sure that the power is off when installing, removing, or examining the light bulb
- Do not use this product in a lamp with a dimmer (e.g. a desk lamp with a round dimmer switch) to avoid damaging the product.
- Do not use this product in a damp environment.
- Do not use the light bulb in a narrow and ill-ventilated lamp shade as it may cause weak signals or heat dissipation issues.
Connect to Yeelight App
This product can be controlled on Yeelight App and be configured to interact with other Yeelight products.
Download App
Search for “Yeelight” in an App store or scan the QR code on the right to
download and install the App.
Add Device
- Go to the Yeelight App homepage, and click “+” in the upper right corner to add your device.
- Proceed with the configuration as instructed on the App.
- Once you’ve added a device successfully, you can find it in the device list.
Note: The operation procedure may differ from what’s described here due
to App updates. Please proceed as instructed on the App.
This product can also be controlled on Mi home, Google Home App, and Amazon
Alexa. You can download and install one of these Apps from an App store, and
configure your device as instructed on the App. After you have finished the
configuration, you can use the App to control the light.
Connect with Mi Home / Xiaomi Home App
This product works with Mi Home / Xiaomi Home app *. Control your device, and interact it and other smart home devices with Mi Home / Xiaomi Home app.
- Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search “Mi Home / Xiaomi Home” in the app Store to download and install it.
- Open Mi Home / Xiaomi Home app, tap “+” on the upper right, and then follow prompts to add your device
Note: The version of the app might have been updated, please follow the instructions based on the current app version.
Works with Mijia
“Works with Mijia”means that the product can be control by Mi Home app or
xiaoai.
Please note that “Works with Mijia” only performs software-level verification
Xiaomi and Mijia are not responsible for the manufacturing, standard
implementation and quality supervision of the products and enterprises.
How to Restore to Factory Settings
Use the light switch to turn the light bulb on and off five times (on for two seconds, off for two seconds). The light bulb will display a circling multi- colored effect, then automatically reset itself and display a white light after five seconds. This shows that the light bulb has been restored to its factory settings.
Specification
Model: YLQPD-0004
Lamp Fiting: E26
Rated Power: 8 W
Luminous Flux: 850 lumens
Rated Input: 120 V ~ 60 Hz 0.12 A
Color Temperature Range: 1700–6500 K
Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz
Service Life: Approx. 15,000 h
Operating Temperature: -10℃ to 40℃
Operating Humidity : 0–85% RH
Dimensions: φ93 × 125mm
FCC ID: 2ABEU-YLQPD-0004
Warning
- Please make sure that the voltage you use is suitable for the operating voltage of this product before use. Using inappropriate voltage may damage the product and pose a safety hazard.
- Do not disassemble the product without permission.
- The bulb will heat during operation. Do not use this product for a long time in closed lampshade. Please make sure that the bulb has sufficient ventilation space to dissipate heat.
- For indoor use only.
- Please disconnect the power before installation to avoid electric shock.
- Use in Dry Locations only.
- Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard dimmer or dimming control.
- The light source of this product is irreplaceable (LED).
- This product can neither be used in emergency exits nor emergency lighting
FCC Compliance Statement
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that my cause undesired operation.）
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>