HOOPOSENSE S02 Tracker and Cover Instruction Manual
- June 9, 2024
- Hoopo
Table of Contents
HOOPOSENSE S02 Tracker and Cover
GENERAL
This document describes the hoopoSense tracker, 502G1000-1A, installation instructions and battery installation/replacement.
PACKAGE CONTENTS
hoopoSense tracker or hoopoSense tracker + protection cover.
Note: please see appendix A for full list of items
SYSTEM OVER VIEW
The hoopoSense trackers are part of the hoopoLogic tracking system that includes a dedicated cloud-based application server. The hoopoSense tracker transmits various environmental and location parameters via LoRa and/or LTE CAT-M cellular communication channels.
ELECTRICAL
The hoopoSense trackers are powered by six (6) primary AA batteries. We recommend using Lithium-Ion L91 AA batteries by Energizer for optimal battery life and extended temperature range.
HOOPOSENSE ACTIVATION & BATTERY OPERATION / REPLACEMENT
Top Cover Removal
Remove the four top cover screws using
Philips head screwdriver.
REMOVE THE TOP COVER
Note: Pay attention to the sealing rubber on the cover. In case the rubber has moved during the cover removal- place it back in place.
BATTERIES INSTALLATION
Slide the batteries in pairs as depicted in the following picture:
Note: Pay attention to the batteries’ polarity; that the (+) pole
pointing up.
SLIDE THE BATTERIES IN PAIRS AS DEPICTED IN THE FOLLOW ING PICTURE :
Note: Pay attention to the batteries’ polarity.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>