ZEBRONICS Zeb-Sunshine 60 W Bluetooth Home Theatre User Manual
- June 9, 2024
- ZEBRONICS
Table of Contents
Tower Speaker
User Manual
Thank you for purchasing ZEB-SUNSHINE PRO Tower Speaker. Please read the user manual carefully before usage & save it for future reference.
Note:
- Avoid the usage of this product at the high temperature and high humidity environment.
- Avoid the self-disassembly of the product as it results in the failure of Warranty.
Features
Wireless BT/USB/mSD/FM/AUX/MIC Input
LED display
13.33cm Subwoofer
Remote control
Karaoke
Wired Mic
Specification
Output Power (RMS) : 50W
Driver size
Subwoofer : 13.33cm
Full Range : 7.62cm x 2
Impedance
Subwoofer : 40Ω
Full Range : 40Ω
Frequency response : 40Hz-20khz
S/N Ratio : ≥70dB
File format support : MP3 (USB/mSD)
Line input : 2ch RCA
Max. supported USB/mSD
memory size : 32GB
FM frequency
scan range :87.5MHz-108MHz
BT Name : Zebronics
BTversion : 5.0
Product dimension (Wx D x H) : 155 x 245 x 620 mm
Net. Weight : 4.8kg
Package content
Speaker :1U
Remote :1U
Input Cable :1U
Wired Microphone :1U
QR Code Guide :1U
Control Panel Description:
- Mic Volume Knob
- Mic Input Port
- LED Display
- Input Mode (BT/USB/mSD/FM/AUX/Mic In)
- Next /Volume +
- AUX Input
- mSD Port
- USB Port
- Previous / Volume –
- Play/Pause/FM Auto Scan
- Master Volume Control Knob
Remote Control
- Power : standby ON/OFF
- Numeric Pad( 0-9) : To select direct tracks from USB/mSD and to select two digits and above, by consecutively pressing
- VoI+ : To increase the volume
- Prev : To select the previous songs in BT/USB/mSD or channels in FM mode
- Vol- : To decrease the volume
- RPT : To Switch between REP ALLtracks or REP 1 track
- Scan : To scan all FM channels available
- Mode : Mode Selection(BT/AUX/USB/mSD/FM/Mic In)
- EQ : Equalizer / Mic settings (Echo, Mic Volume, Mic Priority)
- Play/Pause To Play/ Pause for current song
- Next : To select the next songs in BT/USB/mSD or channels in FM mode
- Mute To Mute / Unmute for currently playing song
Instructions for Use:
Button functions
- Press the “ Mode ” button to change the input mode (BT/AUX/USB/mSD/FM/MIC In) of the speaker.
- Short press the “ Next ” button to change the Next track when in BT/USB/mSD mode or channel in FM mode.
- Short press the “ Prev ” button to change the previous track when in BT/USB/mSD mode or channel in FM mode.
- Short Press the “ Play/Pause ” button to play or pause the track being played in BT/USB/mSD mode.
- Long Press the “ Play/Pause ” button In FM mode to scan the available FM channels.
General Instructions:
BT Mode:
Power ON the speaker, press “ Mode ” button to switch to BT Mode. Switch
ON BT on your phone or tablet and search for nearby BT devices, Search for the
BT name “ Zebronics ” and tap to connect it.
USB/mSD Mode:
The speaker automatically switches to USB/mSD input mode with the LED display
when a USB/mSD card is inserted (this mode isn’t selectable on the speaker or
remote control unless a USB/mSD card is connected).
Ensure that your USB/mSD card contains MP3 audio files (other file types not
supported).
FM Radio:
Switch the speaker to FM mode. In FM mode, long press the Play/Pause
button in the control panel or use the SCN button in the remote to scan
for the available FM channels. Once the scanning is done, the scanned channels
will begin to play. Use Next/Previous button on the control panel or remote
can be used to change the FM channels.
AUX-IN:
The speaker can be connected to an audio device using an RCA to 3.5mm cable.
Connect the one end of the cable to the speaker and the other end to an audio
source. The songs from the audio source can be heard through the speaker.
Instructions for Mic Settings:
Press & Hold the EQ button on the remote control to enter Mic settings.
- In Mic settings, the following setup will appear on the LED display (press & hold again to switch between the Mic settings)
- To adjust Mic Echo, Press & hold EQ it’ll direct you to ECHO volume “E”, now short press ‘Vol+’ or ‘Vol-‘ button on remote control.
- To adjust Mic volume, Press & hold EQ twice it’ll direct you to MIC volume “M”, now short press ‘Vol+’ or ‘Vol-‘ button on remote control and also you can use Mic volume control Knob.
- To change the Mic priority, Press & hold EQ thrice it’ll direct you to PRIORITY setting “C”, now short press ‘Vol+’ or ‘Vol-‘ button on remote to set the MIC priority.
ISO 9001:2015 Certified Company
www.zebronics.com
Documents / Resources
|
ZEBRONICS Zeb-Sunshine 60 W Bluetooth Home
Theatre
[pdf] User Manual
Zeb-Sunshine 60 W Bluetooth Home Theatre, Zeb-Sunshine, 60 W Bluetooth Home
Theatre, Bluetooth Home Theatre, Home Theatre, Theatre
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>