COSTWAY HY10012 Bunk Bed

Before You Start

• Please read all instructions carefully.
• Retain instructions for future reference.
• Separate and count all parts and hardware.
• Read through each step carefully and follow the proper order.
• We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
• Always place the product on a flat, steady and stable surface.
• Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

SAFETY WARNINGS

1. Follow the information on the warning label appearing on the upper bunk end structure and on the carton… Do not remove the warning label from the bed.
2. Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 inches below the upper edge of guard rails.
4. Do not allow children under 6 years to use the upper bunk.
5. Prohibit more than one person on upper bunk.
6. Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free from damage and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Always use the ladder for entering and leaving upper bunk.
9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10. Use of night light may provide added safety precautions for a child using the upper bunk.
11. If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.
12. Always use guardrail on both long sides of the upper bunk.
13. The use of water or sleep flotation mattresses is prohibited.
14. Keep these instructions for future reference.
15. Strangulation Hazard – Never attach or hang items to any part of the bunk bed that is not designed for use with the bed, for example, but not limited to hooks, belts, and jump ropes.
16. Trundle: Only use for mattress 6 inches.

ASSEMBLY INSTRUCTION

Parts List

Hardware List

1. Assemble the foot board according to the figure below.
   Use hardware #1 to connect the A1 and A2 legs with the
   A3(x4) and A4 wood poles to complete the foot board

2. Assemble the stairs according to the figure below.
   Use hardware #2 and dowel #3 to connect B4(x1) and B5(x1) to B6(x4)

3. Assemble the Headboard according to the figure below.
   Use hardware #1, and #4 to connect the B1, and B2 legs with B3(x 10) and the frame (completed in step 2)

4. Following below illustration
   Use hardware #5,#6, and dowel #3 to assemble the Headboard and foot board with Side Rails C2, C3, and Guardrails C4(x2), C5.

5. Following below illustration
   Use hardware #5,#6,#4,#8, and dowel #3 to assemble the Rail E and Guardrails C1(x2) to the Headboard and foot board.

6. Following below illustration
   Use hardware #7, and #8 to assemble the Guardrails D(x2) to the Frame (completed in step 5)

7. Following below illustration
   Assemble 10 Slats P using Hardware #9.

8. Following below illustration
   Assemble Center Leg (H) and Rail(F, G) using Hardware #10.

9. Following below illustration
   Assemble the Frame(completed in step 8) to the foot board using Hardware

   10.![COSTWAY HY10012 Bunk Bed 13](https://manuals.plus/wp-

   content/uploads/2023/03/COSTWAY-HY10012-Bunk-Bed-13.png)

10. Following below illustration
    Assemble Rail (K) to the Frame (Completed in step 9) using Hardware #10,

    2.![COSTWAY HY10012 Bunk Bed 14](https://manuals.plus/wp-

    content/uploads/2023/03/COSTWAY-HY10012-Bunk-Bed-14.png)

11. Following below illustration
    Assemble the Table top (L) to the Frame (Completed in step 10) using Hardware

    11![COSTWAY HY10012 Bunk Bed 15](https://manuals.plus/wp-

    content/uploads/2023/03/COSTWAY-HY10012-Bunk-Bed-15.png)

12. Following below illustration
    Assemble Stairs using Hardware #2,#12,#13 and dowel #3

13. Following below illustration
    Assemble the Stairs to the Bed using Hardware #13.

14. Connect Steel Bracket(hardware ⑯) with Bed, Tighten using 2pcs of hardware ⑨

15. Take center mark, drill hole Φ6×40mm(deep)

16. Use a hammer to push Plastic Button(hardware ⑮) into the wall

17. Tighten using 2pcs of hardware ⑨

Return / Damage Claim Instructions

• DO NOT discard the box / original packaging.
  In case a return is required, the item must be returned in original box. Without this your return will not be accepted.

• Take a photo of the box markings.
  A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.

• Take a photo of the damaged part (if applicable).
  A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.

• Send us an email with the images requested.
  Email us directly from marketplace where your item was purchased with the attached images and a description of your claim.

If you’re having difficulty, our friendly customer team is always here to help.

USA: cs.us@costway.com
AUS: cs.au@costway.com
GBR: cs.uk@costway.com
FRA: cs.fr@costway.com

References

• Costway - More Than Just Furniture

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>